door window draught exc.

[lencot76]

Hello some time ago,someone mentioned about the rubber strip exc .for the doors rather than the "material" one I have who does these and what are they like to fit

[SteveS]

Just got a full set for my 4 door from ESM
very easy to fit bought new clips 6 for each
Rubber I think fitted rubber on outside and felt on inside
You wouldn't believe the difference it makes

[SteveS]

Sorry Misread the door seals are rubber and just push on
Very easy to fit no clips required very sturdy
Again got from ESM

[lencot76]

Hello thanks about the seal,is this the EXC105A one,my doors are wrapped at the moment after spraying ,are the holes there ,for the draught clips to go into

[Boomlander]

The main door draught excluders simply push fit onto the door frame not the door itself.There are holes in the inside of the window channel to fit the Touch Glass type window seals Part No. EXC105A at the top of the door where it meets the glass, the holes at the bottom of the door are for rubber seals to prevent water seeping in.

[liammonty]

The Birmingham Morris Minor Centre (aka David Manners) sell them too - I got mine from there and they made a big difference.

[Boomlander]

The touch glass rubber door/window seals certainly stop the drop glasses rattling whilst driving and are well worth fitting to the outside edge keeping the fabric seals on the inboard side.