Body part

[cplnobbie]

Hi can anyone please shed some light on which panel I need or panels[frame][/frame]

you can just see the main cross member end in picture so it's the panel above it

[simmitc]

If that's the end of the crossmemember, then you need outer and inner front and rear sills. Probably quite a few other bits too, but it will be worth it when it's done. They'll also be a "kick plate" and finisher to add, but they just bolt on once the welding is done.

[cplnobbie]

Hi I take It these bits I need :-
Inner Sill Step L/H (Heavy Gauge With Seatbelt Anchor)
Boxing Panel L/H (2-Door)
Outer Undersill L/H (2-Door/Conv)
Kick/Step Plate L/H (2-Door/Trav/Conv)
Sill Rail Finisher L/H (2-Door/Trav/Conv)

Regards
Anthony

[bmcecosse]

All well detailed here...you'll be needing most of the 'sill' parts and probably a floor section or two... ! http://www.moss-europe.co.uk/shop-by-mo ... anels.html

[cplnobbie]

Looking at ESM I think this Is all I need ?

[les]

You won't need anything until you've chopped out all the rotten metal, and then you'll get the exact measure of what you need.

[cplnobbie]

Already chopped out just need to work out what panels I need as welding for next two days In the workshop

[bmcecosse]

Have you any up to date pictures after the 'chopping' ?