MMT Door repair

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
Stubmiester
Minor Friendly
Posts: 33
Joined: Sun Jul 13, 2014 7:12 am
Location: Melton Mowbray
MMOC Member: No

MMT Door repair

Post by Stubmiester »

Does anyone know which volume in Minor Matters showed how to successfully repair split metal on the inside window ledge-just above where the pull to leather strap is secured. I am in need!
graham1957
Minor Fan
Posts: 149
Joined: Fri Oct 09, 2009 10:41 pm
Location: dronfield
MMOC Member: No

Re: MMT Door repair

Post by graham1957 »

hi i dont know if it has been in minor matters, but what i would do is cut a piece of metal about two inch long and place it behind the crack and secure it by two self tapping screws one each side of crack. next mig weld the crack together. next remove one screw and drill hole out to 6 mm and plug weld the hole, next do the same with the other screw, grind welds flush to outer surface and a thin skim with body filler, sand and paint. Dont forget to treat with waxoyl or similar on the inside area, hope this helps Graham
[sig]8872[/sig]
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: MMT Door repair

Post by bmcecosse »

Protect (or remove|) the glass !
ImageImage
Image
Mark Wilson
Minor Addict
Posts: 960
Joined: Fri Aug 26, 2011 12:42 pm
Location: West Yorkshire
MMOC Member: Yes

Re: MMT Door repair

Post by Mark Wilson »

It's one of the few things covered fairly well in the Lindsay Porter Restoration Manual (Haynes).
Post Reply