no drive
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
no drive
Hello I replaced the rubber and bronze bushes,on the clutch shaft and soaked the partly siezed pedal,in WD40 The pedal is now free and the clutch works,I think the redal mist have seized in the down positin,stopping the clutch engaging .
-
jagnut66
- Minor Legend
- Posts: 3703
- Joined: Fri Apr 11, 2008 7:28 pm
- Location: Mansfield, Nottinghamshire.
- MMOC Member: Yes
Re: no drive
Hi,I think the redal mist have seized in the down positin,stopping the clutch engaging
Do you mean 'pedal must have seized in the down position' ??
Best wishes,
Mike.
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels, now being sprayed by me, slowly......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1952 Morris Minor MM highlight with sidevalve engine still fitted, wants work, so joins the queue for now......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1952 Morris Minor MM highlight with sidevalve engine still fitted, wants work, so joins the queue for now......
Re: no drive
Is the return spring in place? Does the lever protruding from the gearbox move back and forth? Are you sure the problem is in the clutch? Not a broken half-shaft ?? Is the prop shaft turning - and the speedo showing a reading ??
