Non starter

[AndrewT]

Hey guys and girls I have replaced my head gasket,valves,valve springs and had a new rocker assembly and also had the head skimmed put it all back together and it did not want to run set all the gaps to 12 thou as by my book it run but sounded chuffy as if the ht leads where on wrong so I swapped them around to find no difference and now I can't get her to go Atal

[panky]

Have you got them on in the correct firing order - 1,3,4,2 anti-clockwise.

[AndrewT]

Shal have alook tmoro that's the only thing I think it can be I hope so anyway

[panky]

There's an excellent picture on here that shows where the leads should be positioned.

http://www.mmoc.org.uk/viewtopic.php?f=4&t=58143#wrap