I found a very high value somewhere, but I do not think the bolts will accept it without breaking ;)[frame]
I know M8 is between 21 and 37 Nm, so I should expect about the same for this?
torque big end bolts
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
TvdWerf
- Minor Addict
- Posts: 553
- Joined: Wed Jul 28, 2010 9:39 am
- Location: Netherlands, Drenthe
- MMOC Member: No
torque big end bolts
Does anyone knows what the torque is for these bolts?
I found a very high value somewhere, but I do not think the bolts will accept it without breaking ;)[frame]
[/frame]
I know M8 is between 21 and 37 Nm, so I should expect about the same for this?
I found a very high value somewhere, but I do not think the bolts will accept it without breaking ;)[frame]
I know M8 is between 21 and 37 Nm, so I should expect about the same for this?
MM '51 LHD sidevalve 
-
smithskids
- Minor Addict
- Posts: 621
- Joined: Wed Sep 05, 2012 9:32 pm
- Location: East Yorkshire
- MMOC Member: Yes
Re: torque big end bolts
about 28 Lbs Foot. 38 Nm. for the large end bolts. Its a very fine thread. 
Ask Mike Perry, he will know.
Ask Mike Perry, he will know.-
mike.perry
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: torque big end bolts
See http://seriesmm.mmoc.org.uk. Tech Info. All the settings are there
[sig]3580[/sig]