three part clutch
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
three part clutch
can you still get quinten and hazell three part clutch
Last edited by ringway on Fri May 02, 2014 9:08 pm, edited 1 time in total.
Re: three part clutch
There are some QH clutch parts on ebay - but not a Minor clutch. Why so keen on QH ?? Plenty of Borg & Beck out there......
Re: three part clutch
bmcecosse wrote:There are some QH clutch parts on ebay - but not a Minor clutch. Why so keen on QH ?? Plenty of Borg & Beck out there......
Re: three part clutch
i was not sure if any other makes are ok this one on it looks like the original
-
aupickup
- Minor Maniac
- Posts: 6004
- Joined: Tue Jul 20, 2004 11:41 pm
- Location: lanark
- MMOC Member: No
Re: three part clutch
borg and beck are made in china
driveline are the ones to go for
driveline are the ones to go for
-
mike.perry
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: three part clutch
The old MM/803/948 drive plates had one piece friction plates, the new drive plates have segmented friction plates. I removed a little used new plate and found that the friction plates were loose on the rivets. The new clutch plates do not seem to have the bite of the old plates
[sig]3580[/sig]
Re: three part clutch
If the pressure assembly looks ok - just fit a new plate and new carbon thrust.