Spin on oil filter size

[southerly95]

I have a spare spin on oil filter housing which has a 3/4" threaded spigot (approx size). Which filter should I order, suppliers don't say which is which other than fits 1300 or their own spin on kits. Thanks, John

[Trickydicky]

For my spin on oil filter I use halfords part no HOF203. Take the housing into halfords to check the fit from memory it costs around £3.

[Matt]

The spin on filter that fits just about everything (except the marina A+ blocks) is the same as a mini.

The coopers part number for said oil filter is Z25. I don't know the thread size off hand

[katy]

On this side of the pond, Fram PH3614 fits. As TrickyDicky suggested take the housing w/you for a trial fit when you go looking. Besides the thread make sure the gasket on the filter lines up w/the machined surface on the housing.

[dalgrae]

I think the thread size is 3/4 by 16TPI UNF form if that helps

[dalebrignall]

ph966b

[TFM150K]

And keep the box so you know the number for next time (if your memory is anything like mine)!