Hi, I have just bought some metallastic eyebolt bushes from the MMOC parts dept. I am told they need to be modified to fit and that I should refer to a previous issue of Minor Matters where this was discussed.
Unfortunately I am a 'newbie' to the MMOC and don't have back issues of the magazine.
Could someone therefore please advise me how to modify these bushings. I note they are slightly too long. Is it just a matter of cutting to the same length as the eyebolt? If so can a staight cut be done through the rubber and the metal bushing or is it important to somehow keep the taper on the end of the rubber?
Any help would be greatly appreciate.
Thanks
Mark Harnden
56 Series 2
Metallastic eyebolt bushes
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
Matt
- Minor Legend
- Posts: 3845
- Joined: Fri Apr 16, 2004 1:30 pm
- Location: Hampshire/Berkshire/Gloucstershire/Herefordshire
- MMOC Member: No
Re: Metallastic eyebolt bushes
Hi Mark
Can I point you here? http://www.mmoc.org.uk/viewtopic.php?f=6&t=53114
Metalastic bushes are discussed in depth!
Can I point you here? http://www.mmoc.org.uk/viewtopic.php?f=6&t=53114
Metalastic bushes are discussed in depth!
Serial Morris Minor Owner and Old Vehicle Nutter
-
crossword
- Minor Fan
- Posts: 119
- Joined: Tue Nov 22, 2005 12:29 pm
- Location: Sheffield
- MMOC Member: Yes
Re: Metallastic eyebolt bushes
There is a big thread on this in technical ( here ) under the heading Other . Enjoy .
Regards Andrew
Looks like Matt types faster than I do
A
Regards Andrew
Looks like Matt types faster than I do
A
Re: Metallastic eyebolt bushes
Thanks guys, 1 13/16 inch it is!
Cheers
Cheers