Traveller sub-loom and number plate lights

[swampy42]

HI all
Couple of small, hopefully easily answerable queries. I’m near completion on the rear end of the Traveller and wonder if there is a correct path for the number plate lights wire to take, when connecting to the sub-loom. There appear to be no holes available for it to pass though the metal panel beneath the rear doors and just wondered if there is a recognised route? also. as I acquired the car with much of the back end removed I never got to see the sub-loom in place, so does anyone know if the sub-loom is clipped to the car floor or to the wooden rear base rail?

Thanks in advance
Russ

[taupe]

Hi

The wiring goes through a small hole on the RHS next to the earth terminal clip and internally is held by a row of spotwelded clips see here



Taupe

[swampy42]

Hi Taupe
That would explain my confusion - I appear to be missing both the hole and the clips. Easy fix though.
Many thanks again for your help
Russ