New clutch today but......

[lambrettalad]

I just had fitted a new 1098 clutch kit (from moggie centre in black country )

foot on clutch 3/4 way down great lovely and smooth changing gear is like a baby's bottom

BUT clutch all the way down terrible rattle and can't get gears without awful crunching sound

is it over adjusted?

hints and solutions very very welcome

[lambrettalad]

ANSWER YES !!!!!!!!!

[lambrettalad]

NO

now its over adjusted the other way and slipping,roll on friday

[bmcecosse]

Should have about 1" free play at the pedal - and is the return spring fitted? Simple answer to 'all the way down' problem is to fit a rubber stopper on the floor under the pedal to stop it going down more than it needs to.

[John.n]

a rubber block does seem a little crude but effective I guess.
Is it a diaphragm type or not?
Regards,
John

[lambrettalad]

Blooming spring on the wrong way but now

[mogbob]

Result !! Well done.
Bob

[mike.perry]

Better than putting the clutch release forks on the wrong way round... Now that is silly