Discuss Electrical problems here.
Forum rules
By using this site, you agree to our rules. Please see:
Terms of Use
-
samuria
- Minor Legend
- Posts: 1080
- Joined: Tue Dec 08, 2009 9:28 pm
- MMOC Member: No
Post
by samuria »
my wipers were working ok, but now they are very slow

any suggestions????
-
PSL184
- Minor Legend
- Posts: 4978
- Joined: Thu Jul 03, 2008 5:49 pm
- Location: Nuneaton
- MMOC Member: No
Post
by PSL184 »
Lubrication !!!!
[sig]8426[/sig]
Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
-
mike.perry
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Post
by mike.perry »
Clean out the old solid grease and pack with fresh
[sig]3580[/sig]
-
bmcecosse
- Minor Maniac
- Posts: 46561
- Joined: Wed Feb 16, 2005 11:24 pm
- Location: ML9
- MMOC Member: No
Post
by bmcecosse »
Run some thin oil down the spindle bushes as a starting point.
-
samuria
- Minor Legend
- Posts: 1080
- Joined: Tue Dec 08, 2009 9:28 pm
- MMOC Member: No
Post
by samuria »
thanks

now have a starting point

-
samuria
- Minor Legend
- Posts: 1080
- Joined: Tue Dec 08, 2009 9:28 pm
- MMOC Member: No
Post
by samuria »
bmcecosse wrote:Run some thin oil down the spindle bushes as a starting point.
thanks roy. done this now working great

-
bmcecosse
- Minor Maniac
- Posts: 46561
- Joined: Wed Feb 16, 2005 11:24 pm
- Location: ML9
- MMOC Member: No
Post
by bmcecosse »
Great success.....
