Vinyl seat covering

[cscott]

Has anyone recovered seats in two door saloon. How easy if this ?

[charlie_morris_minor]

it is straight forward, just take your time, the trim is held on with spring metal clips, which push over the edge of the seat frame. i can add some photos if you would like

[cscott]

Yes please pictures would be good.

[charlie_morris_minor]

sorry for the delay..
this shows the underside of the seat, on the left hand side you have the back of the seat and you can clearly see the spring metal clips.
In front is the side of the seat, the black line you can see (on the blue vinyl) is a rubber hose that is pushed into the u shaped channel and keeps the seat base trim tight.
[frame][/frame][frame]this is another picture from the underside of the seat before the back rest vinyl is removed
[/frame]
and with the back rest vinyl removed you can see more clips holding the seat base vinyl in place[frame][/frame]

[ASL642]

If you have a digital camera handy, take pictures as you take the seat cover off. Refer to these before you re-assemble, then you can't go wrong.

[cscott]

Thanks for the information and advice. I will give this a go and see what happens.