Indicator warning light

[Chris Edgar]

1962 car..... indicator switch with warning light on end

The warning light has been working intermittently, so I dug the old lilliput bulb out with difficulty & replaced it.
Now it's not working at all...I'm wondering if there is a poor connection somewhere. So before I attempt to remove the cowling to have a look can anyone help with a sequence or any tips.

The manual has no instructions at all.

Thanks

Chris

[mike.perry]

Test new bulb
Check new bulb is screwed in tight
Check indicators are working
Check wires on connector block
Run a test light from Terminal P to earth

[Chris Edgar]

Thanks, Mike
much appreciated.

Having tested it first... I carefully screwed the new bulb in tight with a pair of needle nosed pliers & it now works fine

Chris