As you can see below, after having some wood on the other side renewed, I decided to strip all the old varnish off and reseal the wood and oil - however I discovered that the channels on the near side of the car were knackered, so I took the top and bottom .. cappings? ... off, and then removed the rear sliding glass by sliding it forward and pulling it out... easy... but the front sliding glass was awkward... it was stuck in the 'metalised' felt channel both top and bottom, making it impossible to pull out... So, first question, how was I SUPPOSED to take it out? In the end I simply destroyed the edge of the felt channel since it was for the bin anyway!
Second question, more importantly, when I fir the NEW channels at the bottom, how do they attach, and do you attach them FIRST and then try and get the window into them, or do you (as I suspect) slide the bottom of the window into place with the felt channel already slid on to it?
All help greatly appreciated! Some more window related questions to follow on a different thread...
[frame]
