Interesting to see the front uprriders that way round. I have bored out the holes on my rear ones and will bolt them directGDL wrote:Here is a picture of mine with just over riders on the front and nowt on the rear.
I have since put metal plates on the car and a chrome sorround to the rear plate. I used the exisitng mounts but chut the rear of the over riders to slide of the bar and used a bolt either side of the inner part of the over rider to tighten and secure.
To fix the number plates i used big washers behind the grill (but drilled through the grill) and a coach bolt through the plate, this i found was secure and nobody can undo your number plate.
on to the bumper mounting rods. With my parking I need the rear ones