Indicator wont stay on.

[SgBest348]

Im having a problem where, when i indicated for instance, left it will indicate for a bit but then flick off. im thinking the peg on the stering column just needs ajusting slighty. was just looking for some infomation on how i would go about doing that
cheers SGBest

[bmcecosse]

Yes - you will need to inspect it and perhaps move the column round until the peg is in the middle so it works equally well on both sides.

[LouiseM]

This thread explains how to adjust the 'peg': http://www.mmoc.org.uk/viewtopic.php?f= ... indicators

[pyebibby]

ive had an issue like this, the rear near side indicator has been having terrible connection issues, sorted it out by bodging a new earth wire.

[SgBest348]

cheers for advice, had a look at it and it seems to be very worn, so instead of passing past the knotch when i turn left then knocking it off when i turn back it is simply turning it off as i turn. have a spare one my father has given me, so will attach that. and will let you know how i get on should be done by the end of tomorrow