Nardi steering wheel - boss?

[brian]

Hi,I have just been given a 14" Nardi steering wheel,can anyone please tell me where I can get a boss,(and I don`t mean the X missus),thanks,Cheers,Brian

[brian]

Hi,quick pic,[frame][/frame]

[rossrox]

http://www.motorspeed.com/store_main.as ... uct_id=606

unsure if it would fit on to the steering column though :S

[chrisryder]

it could fit a mountney boss. if you measure the diameter of the centre hole, and how far apart two diagonally oposing bolt holes are, i'll measure my mountney and see if it's similar!

[brian]

Hi,I have sent off an e-mail to motorspeed to see if they have a hub or boss that will fit.The diameter of the centre hole is 60mm,which is just about 2 3/8 inches,.From hole to hole it is 37mm ( 1.1/2 inches ).from diagonal hole to hole 75 mm or 3inch,if that makes sense,thanks,Brian

[chrisryder]

i think the mountney is a lot bigger than that. i'll get my tape measure out in the morning!