Midget Rostyle Wheels

[jaguar68]

Hi Guys,

Would Midget Rostyle wheels fit on standard Minor hubs?

Cheers

John

[PSL184]

Yes
[frame][/frame]

[d_harris]

Sorry, but I think they look plain WRONG on minors.......

Remember that they are only 13" as well....

[bmcecosse]

Seconded.......

[hotrodder13]

i agree 13" Is to small

[d_harris]

13" wheels can look good, if you choose carefully and get the right tyres.

[jaguar68]

It's all part of the quest for better acceleration. I'm not sure about rostyles myself, just checking if they were a "bolt on" option. I'd probably go for Midget steel wheels myself. The suspension would probably need to be dropped 1 1/2 inches to correct the "sit" of the car.

Regards

John

[PSL184]

No longer on mine as I didn't like the look either....

[hotrodder13]

ive lowered mine 3 inch on the front and 13" still dosnt look right, but it could have been the tyres

[jaguar68]

They seem quite cheap on the 'bay. Maybe that's the reason, they don't look good on anything?

[IslipMinor]

I agree about the Rostyle wheels, but 13" x 5.5" steel wheels and 185/70x13 or 165/80x13 give virtually identical rolling radius as 145/80x14 tyres. With the wider wheels and lowered about 2", looks pretty good too! But then I'm biased, and have been looking at them for 40 years!

[jaguar68]

If I get some Midget steel wheels and then find I don't like them, I can always get rid of them again and go back to 14 " wheels. It's not like loosing £350+ on 13" alloys!!

[d_harris]

What width are standard spridget steelies?

[PSL184]

If you run 165 80 R13 tyres on Miget rims the overall rolling radius (and look) won't be that much different to 145's on Minor rims....

[d_harris]

Well, I've just bought a load of 155s from Bully, so wont be swapping for a while. But good to bear in mind when the time comes...

[IslipMinor]

Standard Midget steel wheels are 3.5" wide, so 155's are really the widest tyre to fit.

[hotrodder13]

not to steal the thread but would putting bigger wheels on lower the acceleration then ?

[PSL184]

not to steal the thread but would putting bigger wheels on lower the acceleration then ?

Yes, in theory, the bigger the rolling radius the slower the acceleration but higher the top speed......

[Stig]

Standard Midget steel wheels are 3.5" wide, so 155's are really the widest tyre to fit.

Is that the plain steel wheels? I've got 145's on my Sprite and wouldn't go any wider on those rims but my brother used to run 165/70's on his Midget with Rostyle wheels.

[IslipMinor]

Yes, the plain steel wheels are 3.5" and the Rostyle's are wider, either 4" or 4.5", not sure which, or maybe both depending on the year?? The 3.5", even with 155's, look a bit small and skinny on a Minor!