installed oselli torquemaster where does vacuum connect

Post by **ssnjimb** » Thu Apr 23, 2009 10:45 am

Hello

Just hooked up my oselli torquemaster inlet manifold.

Where does the vacuum pipe from the distributor connect up to.

James

Post by **Stig** » Thu Apr 23, 2009 11:07 am

Isn't there a vacuum take-off on the carb?

Post by **ssnjimb** » Thu Apr 23, 2009 11:13 am

Iam not sure i have only just acquired it.

Its a su hs4 carburettor

James

Post by **Kevin** » Thu Apr 23, 2009 1:15 pm

There is a small stub on the carb, when I get home tonight I will post a photo if no-one else has done so.

Post by **bmcecosse** » Thu Apr 23, 2009 10:19 pm

Just look for a suitable small stub. If not there - you may need to drill the adapter plate and insert a little piece of small diameter copper tube through that, and connect vacuum pipe to the tube.

Post by **Kevin** » Tue Apr 28, 2009 9:17 am

Sorry for the delay here are a couple of photo's that should help.
The stub with the black cover is what you are looking for.

<br>

<br>

And a picture of the stub uncovered.

<br>

<br>