Pedals and shaft.

Post by **jonali** » Tue Apr 21, 2009 7:56 am

Hi Guys,

My car had been stripped of pedals when i adopted it. Probably to scavenge a pedal for a tractor would be my guess as I have only two pedals and I presume the standard three pedal system is required

Had a look round the local scrapyards but no joy.

So can anyone maybe come up with a drg of the pedal shaft ? Gonna get one machined but not sure what the fixing method should be on either end. Would a blind tapped hole in the end with a bolt in do? or was it something fancy.

Regards

Jon

Post by **Stig** » Tue Apr 21, 2009 8:23 am

The clutch pedal is welded onto the end of the pedal shaft, you can buy them new, e.g.:

http://morrisminorspares.co.uk/shop/pro ... 63a44009e4

The brake pedal fits onto the same shaft. Sorry, can't find a picture of one.

Post by **jonali** » Tue Apr 21, 2009 7:35 pm

Thanks Stig, Suddenly all becomes very clear. Had searched esm but clearly not for the right thing. Thanks

Post by **bmcecosse** » Tue Apr 21, 2009 10:17 pm

Here's the page from the Manual -<br>

<br>

Post by **jonali** » Thu Apr 23, 2009 9:12 am

Thanks guys, All makes sense now. The weld to the clutch is the detail I was missing. lJ