Am looking at buying a 1957 Morris Minor convertible that is about 900 kms away, I can borrow an enclosed trailer to haul it with but I think the car is longer than the inside length of the trailer which is 141 inches.
I'm not familiar with Morris's so would like to know how to remove the bumpers and aprons and if I do what will the overall length of the car be then.
Also, what is the width of the car?
TIA, katy
How does one remove the bumpers and aprons?
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
A 948 / 1098cc Minor is 12.5 foot long (149.5 inches) and 5 foot wide (60 inches).
The removal of the bumpers will reduce the length minimally unless you also remove the bumper bars which are attached to the body. This might not be an easy job if rust is present. Even then it will be a tight fit to get a Minor in a trailer 141 inches long. I think you need a bigger trailer!
The removal of the bumpers will reduce the length minimally unless you also remove the bumper bars which are attached to the body. This might not be an easy job if rust is present. Even then it will be a tight fit to get a Minor in a trailer 141 inches long. I think you need a bigger trailer!
Eric - 1971 Traveller
-
- Minor Legend
- Posts: 2031
- Joined: Tue Sep 07, 2004 6:09 pm
- Location: Room 7609
- MMOC Member: No