Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see:
Terms of Use
-
Lukey
- Minor Fan
- Posts: 155
- Joined: Tue Aug 26, 2008 8:08 pm
- Location: West Wales
- MMOC Member: No
Post
by Lukey »
What size is the nut that holds the steering wheel on? Ta in advace.
'67 Morris 1000
-
FrankM83
- Minor Legend
- Posts: 1188
- Joined: Sat Sep 11, 2004 4:05 pm
- Location: Malta
- MMOC Member: No
Post
by FrankM83 »
3/4 Whit
should you wish any more nut sizes there's a sticky in the mechanical section just above your post
-
Lukey
- Minor Fan
- Posts: 155
- Joined: Tue Aug 26, 2008 8:08 pm
- Location: West Wales
- MMOC Member: No
Post
by Lukey »
Ah sorry, I completely forgot about that. Ta.
'67 Morris 1000
-
Declan_Burns
- Minor Legend
- Posts: 1958
- Joined: Wed Apr 18, 2007 7:32 am
- Location: Düsseldorf, Germany
- MMOC Member: No
Post
by Declan_Burns »
I used a 34mm 1/2" drive thin walled socket.
Declan
Regards
Declan
-
mike.perry
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Post
by mike.perry »
Don't forget to remove the fuse for the horn or you will wake all the neighbours!!
[sig]3580[/sig]
-
Matt
- Minor Legend
- Posts: 3845
- Joined: Fri Apr 16, 2004 1:30 pm
- Location: Hampshire/Berkshire/Gloucstershire/Herefordshire
- MMOC Member: No
Post
by Matt »
or a 1 5/16th AF socket
Serial Morris Minor Owner and Old Vehicle Nutter
-
bmcecosse
- Minor Maniac
- Posts: 46561
- Joined: Wed Feb 16, 2005 11:24 pm
- Location: ML9
- MMOC Member: No
Post
by bmcecosse »
Take care the wheel doesn't jump off and smack you in the face - leave the nut on a few threads as you bump it loose on the splines.
-
IslipMinor
- Minor Legend
- Posts: 2147
- Joined: Mon May 10, 2004 9:10 pm
- Location: Oxford, UK
- MMOC Member: Yes
Post
by IslipMinor »
Take care the wheel doesn't jump off and smack you in the face - leave the nut on a few threads as you bump it loose on the splines.
Very good advice!!
Richard
-
StaffsMoggie
- Minor Addict
- Posts: 541
- Joined: Tue Feb 26, 2008 5:41 pm
- Location: Rugeley, the fine town in Staffordshire.
- MMOC Member: No
Post
by StaffsMoggie »
bmcecosse wrote:Take care the wheel doesn't jump off and smack you in the face - leave the nut on a few threads as you bump it loose on the splines.
Thats happened to all of us at some point!!!
