Window Seals

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
plastic_orange
Minor Legend
Posts: 1405
Joined: Fri Sep 17, 2004 8:34 pm
Location: Broughty Ferry
MMOC Member: No

Window Seals

Post by plastic_orange »

Just started to fit a set of window rubbers to Bessie. I started off with the easy one first - side, but it is very slack - and leaking like a sieve. Popular belief is that they don't need sealer (i used it in the past), but a hard knock and I think it would be out again.
When I phoned the supplier - ESM, they said they always use sealer, but I think it will need a fair bit.
Only took me 10 minutes to fit though - any advice before I fit the rest?

Pete
[img]http://img.photobucket.com/albums/v436/sinky_aps/4e634210.jpg[/img] [img]http://img.photobucket.com/albums/v436/sinky_aps/MorrisRain4.jpg[/img]
Top
Redmoggy
Minor Fan
Posts: 349
Joined: Mon May 28, 2007 10:32 am
Location: Rolleston N/Z
MMOC Member: No

Post by Redmoggy »

Lots of black sealant Pete. Mine fitted like a p**** in a trouser leg.

Rod
Top
plastic_orange
Minor Legend
Posts: 1405
Joined: Fri Sep 17, 2004 8:34 pm
Location: Broughty Ferry
MMOC Member: No

Post by plastic_orange »

That's what I feared.

Pete
[img]http://img.photobucket.com/albums/v436/sinky_aps/4e634210.jpg[/img] [img]http://img.photobucket.com/albums/v436/sinky_aps/MorrisRain4.jpg[/img]
Top
Post Reply

Return to “Bodywork”