3.7 Diff
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
3.7 Diff
Hopefully, I will soon be replacing my 4.22 diff with a 3.7 version. This I feel is far more practical (and certainly much less expensive) than a 5 speed conversion. Question is - what to do about the speedo ? Does anyone know if there is a Mini speedo that has near enough the correct 'turns per mile' to give reasonable results with this 3.7 diff ?



-
- Moderator
- Posts: 7592
- Joined: Thu Feb 14, 2002 12:00 am
- Location: Watford, Hertfordshire.
- MMOC Member: No
You could always borrow a sat nav that would at least show how far it was out and if its miles you could use stickers on the speedo glass until you have saved up to get it recalibrated.Question is - what to do about the speedo ?
Cheers
Kevin
Lovejoy 1968 Smoke Grey Traveller (gone to a new home after13 years)
Herts Branch Member
Moderator MMOC 44706
Kevin
Lovejoy 1968 Smoke Grey Traveller (gone to a new home after13 years)
Herts Branch Member
Moderator MMOC 44706
Well - I know my existing mileometer reads almost exactly 1% over, and the speedo agrees with the flashing signs within about 1 mph - and agrees with 56 mph behind trucks ! So - I'm assuming that I just apply the ratio 4.22/3.7 = 1.14 to the speed (and mileage) displayed to find what I am really doing! I had a very early sat nav device some years ago - didn't find it all that much use, and when it stopped working I didn't miss it! However it would be handy if a Mini speedo had near enough the right tpm to read correctly !
Edit - seems it is actually a 3.73 diff - so the correction factor is 1.13.
Edit - seems it is actually a 3.73 diff - so the correction factor is 1.13.
Last edited by bmcecosse on Sat Aug 30, 2008 3:05 pm, edited 2 times in total.



-
- Minor Legend
- Posts: 1010
- Joined: Thu Apr 28, 2005 9:59 am
- Location: Werrington, Stoke-on-Trent
- MMOC Member: No
http://www.mgcars.org.uk/midgetspritecl ... atios.html
Not sure if it helps or not, but it claims there's different pinions available
Might be worth trying the MG specialists to see if there's any truth to it.
Not sure if it helps or not, but it claims there's different pinions available

Might be worth trying the MG specialists to see if there's any truth to it.
Finally got the link to load - excellent find Pup! - tells me speedo in that car with 145x13 wheels would be 995 tpm. And indeed seems speedo drive gears are available in a range of ratios. I wonder if they are same as Mini speedo drives - will have a look later at Mini box. Thanks for the link!
Edit - My speedo is 1504 tpm at the moment, so changing the diff from 4.22 to 3.73 means I now need a speedo close as possible to 1331 tpm. Hmmm - off to dig out some old Mini speedos!
Edit - My speedo is 1504 tpm at the moment, so changing the diff from 4.22 to 3.73 means I now need a speedo close as possible to 1331 tpm. Hmmm - off to dig out some old Mini speedos!



-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
The only Mini speedo i've found so far is 1406 so that's some way towards the required 1331, compared to the 1504 in the car at present. It's not so much the speed that I need accurate - it's the mileage for doing 'reliability run' where average speed must be held very accurately with hidden controls just round the corner!



-
- Minor Addict
- Posts: 833
- Joined: Sun Jun 13, 2004 12:47 pm
- Location: Colne Lancs.
- MMOC Member: No
Roy try http://www.jdo10.pwp.blueyonder.co.uk/page2.html for recalibrating speedo. They are in Keighley.
[sig]2052[/sig]Ian.
-
- Minor Addict
- Posts: 833
- Joined: Sun Jun 13, 2004 12:47 pm
- Location: Colne Lancs.
- MMOC Member: No