Instead of clogging up posts with off topic discussions, have them here. Keep it clean folks!
Forum rules
By using this site, you agree to our rules. Please see:
Terms of Use
simmitc
Moderator
Posts: 4920 Joined: Thu Apr 15, 2004 9:43 amLocation: EssexMMOC Member: Yes
Post
by simmitc Thu Jun 05, 2008 10:11 pm
Can anyone tell me the thread size for studs on a standard BMC metal wheeled MINI (not Minor, I've got plenty of them to check against
. Thanks in advance.
d_harris
Minor Legend
Posts: 4388 Joined: Thu Apr 15, 2004 3:52 pmLocation: Sunny BrightonMMOC Member: No
Post
by d_harris Thu Jun 05, 2008 10:13 pm
If no one else can I bet Matt will know but he's in the pub right now......
les
Minor Maniac
Posts: 9179 Joined: Tue Feb 12, 2002 12:00 amLocation: kentMMOC Member: Yes
Post
by les Thu Jun 05, 2008 10:27 pm
double check, 3/8 unf
Matt
Minor Legend
Posts: 3845 Joined: Fri Apr 16, 2004 1:30 pmLocation: Hampshire/Berkshire/Gloucstershire/HerefordshireMMOC Member: No
Post
by Matt Thu Jun 05, 2008 11:26 pm
Same as the minor whatever that is...
Serial Morris Minor Owner and Old Vehicle Nutter
Alec
Minor Legend
Posts: 2148 Joined: Thu Apr 15, 2004 7:29 amLocation: Oswestry, ShropshireMMOC Member: No
Post
by Alec Fri Jun 06, 2008 4:59 pm
Hello simmitc,
bmcecosse
Minor Maniac
Posts: 46561 Joined: Wed Feb 16, 2005 11:24 pmLocation: ML9MMOC Member: No
Post
by bmcecosse Fri Jun 06, 2008 10:23 pm
Both the same - 3/8" UNF. The wheel nuts fit both - BUT they have different tapers and should not be mixed up.
simmitc
Moderator
Posts: 4920 Joined: Thu Apr 15, 2004 9:43 amLocation: EssexMMOC Member: Yes
Post
by simmitc Sat Jun 07, 2008 11:15 am
Thanks chaps.
. Thanks in advance.
