paint type and HVLP

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
User avatar
eastona
Minor Fan
Posts: 394
Joined: Sat Jan 14, 2006 11:47 pm
Location: Glos
MMOC Member: No

paint type and HVLP

Post by eastona »

Someone mentioned the £50 B&Q HVLP spray system a while back along with enamel paint.

The question is, can you use those systems with cellulose? and what kind of paint do I have? Mine's a '69 4 door in Almond Green.

I've got a sill and four wings to do, so fancy my chances with the cheapy spray gun and lots of elbow grease, just not sure what kind of paint and whether it's compatible with the gun.

I've done a search for threads and I'm none the wiser (maybe because I'm useless at finding things :roll: )

Also, has anyone actually used the guns and what kind of results were got?

EDIT: Machine Mart do a cheaper one that is not suitable for celly, but I'm still looking at the Wagner one.
Andrew
overider
Minor Fan
Posts: 482
Joined: Sun Aug 19, 2007 9:55 pm
Location: Yorkshire.Gods own county.
MMOC Member: Yes

Post by overider »

HAVE IT! LOVE IT! DRIVE IT!
Bluesman
Minor Fan
Posts: 216
Joined: Fri Aug 31, 2007 8:55 am
Location: Malmö, Sweden
MMOC Member: No

Post by Bluesman »

Basically, I think it´s a no-go, since IMO a HVLP gun shoots out loads of paint without the paint being atomized into tiny droplets by compressed air (conventional spray gun). This means no overspray, but also that the basic "thinnest paint, thinnest coat, repeat often" cellulose tactic won´t work. HVLP guns also need thicker paint, which is a big no-no with cellulose.

I may be wrong on this, it´s been many moons since I touched Celly paint.

Cheers /Richard
User avatar
eastona
Minor Fan
Posts: 394
Joined: Sat Jan 14, 2006 11:47 pm
Location: Glos
MMOC Member: No

Post by eastona »

Thanks for the link, it looks OK.

The B&Q jobbies are down to £33, although I may be tempted to go for one of the more expensive earlex ones. I guess £99 spent on this may be the way to a cheaper, half decent finish.

Quieter, less overspray also works for me.

Andrew
Maggie, 1969, 4 door, Almond Green.
And Project "Traveller"...
[sig]4253[/sig]
jonathon
Minor Legend
Posts: 4052
Joined: Sun Jan 16, 2005 3:43 pm
MMOC Member: No

Post by jonathon »

We spray everything with HVLP guns. They will spray virtually any paint, and we have sprayed many cars in celly and 2K with no need to adjust nozzles etc or air pressure. I'd check the paint spec as it will tell you at what CFM to spray and which nozzle to use
Is the system you mention an all in one kit ie just a gun or a compressor and gun (electric)

Bluesman
Minor Fan
Posts: 216
Joined: Fri Aug 31, 2007 8:55 am
Location: Malmö, Sweden
MMOC Member: No

Post by Bluesman »

Alright, that proved me wrong. Good to know that such a device can do the job! Also good to know that I actually can be wrong too :-)

/Richard
jonathon
Minor Legend
Posts: 4052
Joined: Sun Jan 16, 2005 3:43 pm
MMOC Member: No

Post by jonathon »

:D :wink:

User avatar
eastona
Minor Fan
Posts: 394
Joined: Sat Jan 14, 2006 11:47 pm
Location: Glos
MMOC Member: No

Post by eastona »

the cheap ones (~£50, but B&Q are on special at £33) are just a gun that does it all, but the more expensive (~£100, it's all relative :) ) are a compressor and gun (IIRC they call it a "spray station").

Andrew
Maggie, 1969, 4 door, Almond Green.
And Project "Traveller"...
[sig]4253[/sig]
Post Reply