DOES ANYONE HAVE A DRAWING OR PICTURE OF THE PIPE USED ON A SIDEVALVE WITH WATER PUMP THAT GOES TO THE BOTTOM OUTLET?
I HAVE SEEN ONE AND BELIVE IT IS A METAL TUBE THAT GOES BETWEEN THE PUMP AND RAD ,(CONNECTED WITH RUBBER HOSES)AND IT HAS A HALF INCH SPUR OFF IT THAT GOES TO THE HEATER
I AM CONVERTING A SIDEVALVE THAT DID NOT HAVE A WATER PUMP AND AM JUST MISSING THIS BIT,IF ANYONE HAD ONE I COULD BORROW TO GET COPIED THAT WOULD BE EVEN BETTER!OR IF ANYONE HAD ONE TO SELL WOULD BE HAPPY TO BUY ONE,BUT I DONT SUPPOSE THAT IS VERY LIKELY.
MANY THANKS
DAVID SEYMOUR
MM WATER PUMP BOTTOM OUTLET
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
WPR678B
- Minor Legend
- Posts: 1103
- Joined: Tue Jan 03, 2006 9:34 pm
- Location: Dorset, UK
- MMOC Member: Yes
Re: MM WATER PUMP BOTTOM OUTLET
That is correct. It is a brass tube that is connected by a rubber hose at each end. You used to be able to get a hose tail for the heater hose that clamped through a hole in the original rubber hose which came in the kit for fitting the Smiths external pump that ran off the back of the fan belt!seymour wrote: I HAVE SEEN ONE AND BELIVE IT IS A METAL TUBE THAT GOES BETWEEN THE PUMP AND RAD ,(CONNECTED WITH RUBBER HOSES)AND IT HAS A HALF INCH SPUR OFF IT THAT GOES TO THE HEATER
-
alanworland
- Minor Legend
- Posts: 1453
- Joined: Tue Jan 30, 2007 10:09 pm
- Location: Essex
- MMOC Member: No
Hi, When I added the water pump to my vehicle I was never very happy at the double sets of hose clips involved and as a result I sourced a one piece rubber hose (QH Part No RH 916) which fitted lovely and does away with two potential leak points. I have the original brass pipe spare if you require it. I am in essex if you are interested.
Alan
Alan
-
mike.perry
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No