wax oil
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
dalebrignall
- Minor Legend
- Posts: 2528
- Joined: Fri Aug 03, 2007 4:06 pm
- Location: stalbans
- MMOC Member: No
wax oil
i got some air tools for christmas i have pressuer washed the underneath of the car.i am going to spray wax oil under the wheel arches and the whole underside of the car will this be benificial
-
Willie
- Minor Legend
- Posts: 3204
- Joined: Tue Feb 12, 2002 12:00 am
- Location: S E London
- MMOC Member: No
Waxoyl
Yes, good stuff, dip the nuts and bolts in it,spray it inside all box members and cavities, but, this is not the time of year to do it unless you stand it in very hot water until it is really runny. With the chassis
a good coating will be beneficial followed by use on the road to pick up
a layer of dust etc then another application. This will give a long lasting gooey coating which has protected all of my rebuilds very well just needing a touch up with a brush occasionally. Again it is the wrong time of the year (salt), easy to say but it should have been done well before the winter weather. Don't forget to do the petrol tank.
a good coating will be beneficial followed by use on the road to pick up
a layer of dust etc then another application. This will give a long lasting gooey coating which has protected all of my rebuilds very well just needing a touch up with a brush occasionally. Again it is the wrong time of the year (salt), easy to say but it should have been done well before the winter weather. Don't forget to do the petrol tank.
Willie
[img]http://i39.photobucket.com/albums/e197/wuzerk/mo9.jpg[/img]
[img]http://i39.photobucket.com/albums/e197/wuzerk/mo9.jpg[/img]
Heat and/or mix with white spirit. And shake it up well! But no point spraying this over any rusty bits - fix them first and treat with rust 'killer'. Waxoyl is best used inside the closed sections of the car - sills/rear 'chassis' members/door posts / front inner wing sections/front chassis members and up around the steering rack.



-
alex_holden
- Minor Legend
- Posts: 3798
- Joined: Tue Jul 25, 2006 9:46 am
- Location: Burnley
- MMOC Member: No
Don't be tempted to heat the tin of Waxoyl with anything but a bucket of hot water - the fumes that come off it are explosive.


Alex Holden - http://www.alexholden.net/
If it doesn't work, you're not hitting it with a big enough hammer.
-
paulhumphries
- Minor Legend
- Posts: 1010
- Joined: Thu Apr 28, 2005 9:59 am
- Location: Werrington, Stoke-on-Trent
- MMOC Member: No
I'll agree with that.alex_holden wrote:Don't be tempted to heat the tin of Waxoyl with anything but a bucket of hot water - the fumes that come off it are explosive.
A few months ago I tried (outside) gently heating around a cup full in an old saucepan to evaporate the solvents to leave a thick Waxoyl for brushing onto bolts etc.
Almost instantly it burst into flames.
Luckilly I was prepared so had a CO2 extingusher handy but that then just blew flaming Waxoyl everywhere
Stupid I know but I've learn my lesson - NEVER heat Waxoyl with anything other then hot water.
Paul Humphries
I use a hot air gun on mine less risk of a fire and quicker than water,but there is a slight risk I suppose,but means you can quickly reheat in the sprayer(I use an empty shultz,dont know how to spell it,gun and container just put the wax oil into the container attached to the gun and use the hot air gun to warm the container then if it starts to go thick re warm containor and the alloy gun ,works great) Cheers
-
dalebrignall
- Minor Legend
- Posts: 2528
- Joined: Fri Aug 03, 2007 4:06 pm
- Location: stalbans
- MMOC Member: No
-
dalebrignall
- Minor Legend
- Posts: 2528
- Joined: Fri Aug 03, 2007 4:06 pm
- Location: stalbans
- MMOC Member: No
