Cartridge oil filter whats the deal?

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
alex_holden
Minor Legend
Posts: 3798
Joined: Tue Jul 25, 2006 9:46 am
Location: Burnley
MMOC Member: No

Post by alex_holden »

Hmm... Think I've always put the pressure plate the other way up. Oh well. :roll:
ImageImage
Alex Holden - http://www.alexholden.net/
If it doesn't work, you're not hitting it with a big enough hammer.
Top
Kevin
Moderator
Moderator
Posts: 7592
Joined: Thu Feb 14, 2002 12:00 am
Location: Watford, Hertfordshire.
MMOC Member: No

Post by Kevin »

Think I've always put the pressure plate the other way up.
Is that really likely Alex I think you would have noticed that the spring doesnt locate that way round plus the extra pressure would have made the assembly quite difficult to compress.
Cheers

Kevin
Lovejoy 1968 Smoke Grey Traveller (gone to a new home after13 years)

Herts Branch Member
Moderator MMOC 44706
Top
alex_holden
Minor Legend
Posts: 3798
Joined: Tue Jul 25, 2006 9:46 am
Location: Burnley
MMOC Member: No

Post by alex_holden »

Kevin wrote:
Think I've always put the pressure plate the other way up.
Is that really likely Alex I think you would have noticed that the spring doesnt locate that way round plus the extra pressure would have made the assembly quite difficult to compress.
I'm not certain and I don't really want to pull it apart to check.
ImageImage
Alex Holden - http://www.alexholden.net/
If it doesn't work, you're not hitting it with a big enough hammer.
Top
Kevin
Moderator
Moderator
Posts: 7592
Joined: Thu Feb 14, 2002 12:00 am
Location: Watford, Hertfordshire.
MMOC Member: No

Post by Kevin »

I'm not certain and I don't really want to pull it apart to check.
No need to until the next oil change, its just that normally you are quite meticulous.
Cheers

Kevin
Lovejoy 1968 Smoke Grey Traveller (gone to a new home after13 years)

Herts Branch Member
Moderator MMOC 44706
Top
Post Reply

Return to “Mechanical”