useless info?

Post by **les** » Wed Oct 10, 2007 8:58 pm

I have just mailed a friend some info, and thought of you lot!
On many replacement rear chassis sections, the welded in tube that takes the bushes for the shackle pin is often too short (there's a suprise!) this in turn causes the shackle plates to bind on the chassis edges in use. The correct size for this tube is 1.5'' long x 7/8'' ID. if anyone had a mind to alter it. Just a little item for your note book, or not!

Post by **gatekeeper** » Tue Oct 16, 2007 9:53 pm

Thanks Les, I've noted it in mine.