waxoyl spraying

[FlyingScot]

I was using one of the small aerosol waxoyl tins but the probe was only about 40mm long. I cut a piece of electrical cable, the type used in domestic lighting circuits I think it is 1mm twin and earth, and pulled out the solid wire. I then had a probe long enough to do the chassis legs.
Just pop it onto the 40mm one supplied, I used a bit of tape to make sure it did't fall off.
Steve

[wibble_puppy]

clever

[bmcecosse]

Surprised any worthwhile amount of waxoyl passed through such a small tube !