Kind regards
Air filter inlet pipe
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
davidwarren
- Minor Friendly
- Posts: 60
- Joined: Thu May 03, 2007 5:04 pm
- Location: Washington, Tyne & Wear
- MMOC Member: No
Air filter inlet pipe
Hi, the air filter inlet pipe on the back of my air filter housing has snapped off. Can you still buy the air filter housing? If so where?
Kind regards
Kind regards
[img]http://images.fotopic.net/?id=44538713&outx=300[/img]
See my pictures at: http://davidwarren.fotopic.net/
See my pictures at: http://davidwarren.fotopic.net/
-
MoggyTech
- Minor Legend
- Posts: 1466
- Joined: Sat Aug 11, 2007 12:06 pm
- Location: Livingston Scotland
- MMOC Member: No
This happened to me a year ago, I could not source the inlet pipe on it's own, or a new filter housing either. I was lucky, and the pipe landed on the engine tie plate and stayed there.
I simply cleaned it up, cut a few slots at the filter end of the pipe, pushed it back in, bent over the cut parts and brazed it back in, from the inside. It aint coming off again either!
I simply cleaned it up, cut a few slots at the filter end of the pipe, pushed it back in, bent over the cut parts and brazed it back in, from the inside. It aint coming off again either!
Last edited by MoggyTech on Tue Aug 28, 2007 2:30 pm, edited 1 time in total.
-
davidwarren
- Minor Friendly
- Posts: 60
- Joined: Thu May 03, 2007 5:04 pm
- Location: Washington, Tyne & Wear
- MMOC Member: No
-
chickenjohn
- Minor Legend
- Posts: 4064
- Joined: Tue Dec 07, 2004 8:50 am
- Location: Margate, East Kent
- MMOC Member: No


