Rusty alloy?

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
Axolotl
Minor Fan
Posts: 357
Joined: Thu Apr 20, 2006 11:14 am
Location: Burghfield Common
MMOC Member: No

Rusty alloy?

Post by Axolotl »

If the Traveller has alloy panels between the wood, why do mine appear to be rusting? I've noticed suspicious bubbles appearing under the paintwork near the bottom of the panels directly behind the door post on both sides of the car.

Is it possible the car was rebuilt using steeel panels?
RogerRust
Minor Legend
Posts: 2437
Joined: Mon Oct 24, 2005 7:10 pm
Location: North Bedfordshire,
MMOC Member: No

Post by RogerRust »

Test them with a magnet.
In fact you can get some blistering with the aluminium panels so that is probably all it is.
Image

This message board is like a family - you can't choose the other members!! But remember engine oil is thicker than water.
bigginger
Minor Maniac
Posts: 5928
Joined: Thu Sep 09, 2004 11:01 pm
MMOC Member: No

Post by bigginger »

I'm sure I just said this, but apparently not :( Justin Minor told me re his Landrover that steel (B post) touching the alu causes this effect, maybe it's that. Worth checking the steel, I'd have thought.
Dominic
Minor Addict
Posts: 640
Joined: Tue Dec 27, 2005 4:50 pm
Location: North West
MMOC Member: No

Post by Dominic »

bigginger wrote:............. that steel touching the alu causes this effect, maybe it's that
I worked with an aircraft restorer for a while, and any joints between different metals had a barrier paste spread between them to avoid the electrolytic action that causes corrosion between different metals. I cannot for the life of me remember what the stuff was called, as I worked on the wooden parts! It was a pale lime green, (almost limeflower!) Might be worth "googling" for more details?
Owns: Skoda Citigo
1968 Morris Minor Convertible[sig]3739[/sig]
jonathon
Minor Legend
Posts: 4052
Joined: Sun Jan 16, 2005 3:43 pm
MMOC Member: No

Post by jonathon »

You can tell if the panel is steel by scratching the bubbled surface , if it is redish brown corrosion then its steel. Alloy erodes and the effect is a white chalky blister. Dum dum creates a good barrier between the alloy panels and the wood/steelwork. :wink:

Post Reply