I spotted a fairly crabby, but complete looking twin HS4 set-up with manifold and linkages. Left a bid on spec and won.
Arrived today, AUD665 carbs. Triumph origin I think. Likely to be of any use for a Minor?
Thanks
Twin HS4 carburetors
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Twin HS4 carburetors
1967 1098 saloon (known by previous owner as 'Fitzroy')
-
philthehill
- Minor Maniac
- Posts: 12105
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Twin HS4 carburetors
Triumph Spitfire 1500cc carbs.
https://sucarb.co.uk/carbspec/carburett ... es/id/2419
The Minor carb is at an angle with vertical float chamber. The Spitfire carbs are horizontal with vertical float chambers.
They can be made to fit but you will need to re-needle the carbs and may have to change the damper springs.
https://sucarb.co.uk/carbspec/carburett ... es/id/2419
The Minor carb is at an angle with vertical float chamber. The Spitfire carbs are horizontal with vertical float chambers.
They can be made to fit but you will need to re-needle the carbs and may have to change the damper springs.
Re: Twin HS4 carburetors
Thank you.
I see the float chamber is attached with a bolt. Is it possible to just rotate it a few degrees to make it vertical, if that’s what the manifold needs?
I see the float chamber is attached with a bolt. Is it possible to just rotate it a few degrees to make it vertical, if that’s what the manifold needs?
1967 1098 saloon (known by previous owner as 'Fitzroy')
-
philthehill
- Minor Maniac
- Posts: 12105
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Twin HS4 carburetors
They can be made to fit by adjusting/removing the stop. The float chamber must not be able to rotate once the stop is ajusted/removed so you will have to devise and fit a new stop.
Re: Twin HS4 carburetors
Thank you.
For now, they will be added to my parts collection. To be used another day. My Minor is still at the workshop, refusing to run consistently
For now, they will be added to my parts collection. To be used another day. My Minor is still at the workshop, refusing to run consistently
1967 1098 saloon (known by previous owner as 'Fitzroy')
Re: Twin HS4 carburetors
Excellent, good to know.mobylette wrote: ↑Thu Jun 25, 2026 2:24 pm Burlen sell the adaptors
https://sucarb.co.uk/float-chambers-spa ... ptors.html
1967 1098 saloon (known by previous owner as 'Fitzroy')
