Morris Minor Owners Club

Yes looking again I think its probably a 50's Hillman Minx..

Taupe

Could be .....also looks similar to a Standard 8 or 10 to me..

Taupe

Yes.... useless stuff in my experience especially from a spray can and a shadow of the original type.... but less likely to react with other paint as its so weak and washy and dosent stick or dry properly ...

taupe

Is it the useless modern Hammerite or the original solvent based?

Taupe

Pick it out or spear it with a needle?

Taupe

If its the aluminium side panels you need you can Buy 16 swg sheet on ebay....its then easy to cut out with shears...

If its steel parts try Andrew Eggleton....

Taupe

One came to me as well for another wanted item......

I agree with Phil....When you fit a replacement (as your casting and the mounting studs sound like they are damaged beyond repair) bear the below in mind whether you decide to obtain an original type or a conversion (spin on) type.... David Jay posted this elsewhere "I am posting this so that h...

I've never been able to find them in the AKD3541 or 3542. The illustration you're expect them to be on is this one :-? It clearly shows the little 'Washer (rubber)' item 25 that Phil noticed missing. The two door plugs (grommets) are shown on A6-1 adjoining BA14-1 of the body parts list Part number...

Yes just slacken the nuts and wiggle them free.

T

Going down to Beaulieu for Spring autojumble booked into Dorset Branch moggyfest display inside the grounds, 260 miles each way on new engine, this will be the first time the car has travelled there after years of work, we’re greatly looking forward to it and seeing all the cars and buying more jun...

Thanks Steve Both Classic Repro and ESM do the series 2.. '53' version but its more likely to have been fitted with the Series 2.. '51' version as my picture...I suppose I could use the later one as a template but would really prefer to obtain or copy an original '51' version so I can get it just ri...

Hi I'm working on a nice early SII splittie traveller project which has a mangled up later patent plate fitted with 54 and 55 patents referred...Im looking for one like the item circled the patent date is 51 which I presume is the correct one for a December 53 utility car/traveller... does anyone ha...

There is a list at the top of the mechanical section.....Heading is Thread Sizes

Taupe

As above I also think they are usually 2BA but they might just be 3/16" UNF?

I think that it is also designated 10/32 UNF

T

Yes exactly that. My thread has further details. Unfortunately my wheel boxes are seized. I have discovered that at one time the spindle, gear and splined part were supplied as replacement parts. It may be possible for me to disassemble the wheel boxes to remove the corrosion that is causing them t...

How about this Austin then! Nicely rounded I think.........


Taupe

Its probanly been superglued in then.. try heat then successively larger hammers...?

T

That is the LHD dipswitch hole I think...... Earlier cars had a bolted on plate and rubber gasket and a slightly smaller circular hole ....see here from parts list N5 The bitumen/asbestos or fibre felt cover was probably cheaper to install and just as good at keeping out water. :D Dip switch and pla...

Dont Know if correct but this looks about the right location?


Taupe