The threads are 3/8" UNF. with a 'R' clip to keep the nut in place.
Why do you want to change the tie rods from Minor to Marina?
Search found 10777 matches
- Sat May 04, 2024 5:53 pm
- Forum: Mechanical
- Topic: marina tie bars
- Replies: 1
- Views: 72
- Sat May 04, 2024 11:09 am
- Forum: Mechanical
- Topic: Opening up a 202 head
- Replies: 19
- Views: 749
Re: Opening up a 202 head
The MiniMania article is interesting. I agree with the comment that the 12G202 head only needs a good clean up of the inlet and exhaust tracts to get better efficiency. The stage head fitted to the Mini Cooper? I have never come across one or having being aware of one being fitted ex factory other t...
- Thu May 02, 2024 5:46 pm
- Forum: Off-Topic
- Topic: Lawnmower Carburettor Ethanol ?
- Replies: 4
- Views: 241
Re: Lawnmower Carburettor Ethanol ?
My mower fitted with a Honda OHC engine started 2nd pull after standing all winter in the shed. The carb is fitted with a choke which helps. Most Honda engines fitted to lawn mowers have a float chamber drain facility or the ability to easily remove the float chamber to drain. After a summer of mowi...
- Thu May 02, 2024 10:59 am
- Forum: Mechanical
- Topic: Ford gearbox
- Replies: 9
- Views: 609
Re: Ford gearbox
Thanks for the clarification.
The angle of the classic Mini Cooper S HS 2 carb is slightly different to that of the MG Midget so I would suggest that the angle of the carbs is clarified as the float chamber fuel level could be effected
The angle of the classic Mini Cooper S HS 2 carb is slightly different to that of the MG Midget so I would suggest that the angle of the carbs is clarified as the float chamber fuel level could be effected
- Thu May 02, 2024 10:49 am
- Forum: Mechanical
- Topic: Breather systems
- Replies: 13
- Views: 310
Re: Breather systems
The side seals must overlap the sump neoprene gaskets and they must abut hard against the main bearing caps.
That is why the side gaskets must be fitted first.
That neoprene seal looks to be too long.
That is why the side gaskets must be fitted first.
That neoprene seal looks to be too long.
- Thu May 02, 2024 8:02 am
- Forum: Mechanical
- Topic: Breather systems
- Replies: 13
- Views: 310
Re: Breather systems
The problem with the neoprene seals is that they are near solid and cannot compress like the cork seal. The neoprene seals only appear to be available for the 1275cc engine and that has a larger radius rear sump opening so requiring a longer seal (Pt No: TAM1089) and different sump. The front seal f...
- Wed May 01, 2024 10:47 pm
- Forum: Mechanical
- Topic: Breather systems
- Replies: 13
- Views: 310
Re: Breather systems
As regards the neoprene sump end seals - they may need to be trimmed in length to suit.
- Wed May 01, 2024 10:37 pm
- Forum: Mechanical
- Topic: Clutch cylinder
- Replies: 2
- Views: 76
Re: Clutch cylinder
The ring seal is for the alternative after market piston fitted to some slave cylinders.
https://www.moss-europe.co.uk/repair-ki ... soc=730567
If your slave cylinder does not have the ring seal ditch the ring seal.
https://www.moss-europe.co.uk/repair-ki ... soc=730567
If your slave cylinder does not have the ring seal ditch the ring seal.
- Wed May 01, 2024 8:08 am
- Forum: Mechanical
- Topic: Opening up a 202 head
- Replies: 19
- Views: 749
Re: Opening up a 202 head
I suspect that you have put the above as an example but I notice that the head in the above photo is not a 202 item and you have removed the manifold locating rings which are there to line up the manifolds and so aid gas flow.
- Wed May 01, 2024 7:54 am
- Forum: Mechanical
- Topic: Ford gearbox
- Replies: 9
- Views: 609
Re: Ford gearbox
If the Cooper S exhaust manifold is a ex factory pressed steel item and is intended to be fitted a Minor it will hit the chassis leg. I suspect that any aftermarket Classic Mini LCB exhaust manifold will do the same. The throw out of the bottom of the manifold is there to clear the Mini gearbox ther...
- Tue Apr 30, 2024 3:31 pm
- Forum: Problems with the Messageboard
- Topic: S L O W
- Replies: 14
- Views: 321
Re: S L O W
The web site is still very very slow.
- Tue Apr 30, 2024 2:39 pm
- Forum: Mechanical
- Topic: Opening up a 202 head
- Replies: 19
- Views: 749
Re: Opening up a 202 head
I have to agree with Les. If you want improvement - source a 12G295 head, skim 0.060" from the head face and you have a very good and efficient head without having to do much work. The down side of the 12G295 head is the price. :-( Saying that here is a 12G295 head going cheap (at the moment) h...
- Tue Apr 30, 2024 9:59 am
- Forum: Off-Topic
- Topic: Any mathematicians on here?
- Replies: 11
- Views: 228
Re: Any mathematicians on here?
If it wont fit get a bigger hammer
- Mon Apr 29, 2024 9:35 pm
- Forum: Mechanical
- Topic: Clutch Master cylinder used with Toyota 5 speed box
- Replies: 1
- Views: 96
Re: Clutch Master cylinder used with Toyota 5 speed box
I believe that the Toyota 5 speed conversion done by the Morris Minor Centre for use in a Morris Minor used the clutch release mechanical linkage. The hydraulic clutch release system was used on the MG Midget/Sprite conversion. For example - you can use a clutch master cylinder fitted to the cross m...
- Mon Apr 29, 2024 10:22 am
- Forum: Wanted
- Topic: Damper valve spring
- Replies: 3
- Views: 198
Re: Damper valve spring
Damper valve assy sent off 9:00 am this morning first class post.
- Sun Apr 28, 2024 9:34 pm
- Forum: General Discussion
- Topic: Morris Minor at 75 - an American view
- Replies: 0
- Views: 116
- Sun Apr 28, 2024 6:58 pm
- Forum: Mechanical
- Topic: Piston
- Replies: 12
- Views: 190
Re: Piston
Having a hydraulic clutch on my minor and the slave cylinder being the same as a classic Mini I recognised the slave cylinder from what is visible in the above photo.
- Sun Apr 28, 2024 6:52 pm
- Forum: Wanted
- Topic: Van or pick or pick up
- Replies: 4
- Views: 201
Re: Van or pick or pick up
Which side do you require?
- Sun Apr 28, 2024 3:42 pm
- Forum: Wanted
- Topic: Gearbox crossmember
- Replies: 2
- Views: 116
Re: Gearbox crossmember
https://www.ebay.co.uk/itm/386922597008?itmmeta=01HWJJCB7CY6SWN9P5BD97TM4E&hash=item5a16624a90:g:Kg8AAOSw8DZk51tw&itmprp=enc%3AAQAJAAAA0I%2Fu5njKGTwjv5%2FTWGz1FDAoP8Owu%2FRaGXxCvSSC2EogcFDVVPB%2BJTG1fcJfde32eH4AAniuPd7Lt10EiaM5sxEFpYvTMMiCUAUolzdccbo55FThX9ouPlPnKqn9wuO0gP9M1vCv2gC6JvyXql1rB...
- Sun Apr 28, 2024 3:28 pm
- Forum: Mechanical
- Topic: Piston
- Replies: 12
- Views: 190
Re: Piston
Bill That is the main seal of the slave cylinder. The dust seal of the slave cylinder is much larger. See link below. https://www.ebay.co.uk/itm/395196380647?itmmeta=01HWJHXB2ZACMZY64D4Z2EZYR9&hash=item5c038a35e7:g:tqcAAOSwMSxfw-yI&itmprp=enc%3AAQAJAAABAIDWhzUbgU1dnMmsRKEcC6yPzURyL3dTxxv4TtN...