Morris Minor Owners Club

Much better picture of bush, Question do I have to but the new arm ?[frame][/frame]
See In square where the rubber Is falling apart.

other side off ok after using a rubber mallet banging on the sides[frame][/frame]

Cant get the top nut off to remove hub what do you think impact driver, have sprayed It was release fluid[frame][/frame]

Cant get the top nut off to remove hub what do you think impact driver, have sprayed It was release fluid[frame][/frame]

I take these have to be replaced as bush where thread Is looks shot[frame][/frame]

How do I remove the Link from the rear shock absorber please, Have undone the nut with the thread on but how do I get It free, Did try a gentle tap with hammer but nothing .

Regards
Anthony

Question where do I put the axle stands on the rear If I'm taking the whole rear axel off and do I put axle stands on the front ?

Any chance you can post pics of sides and underneath please

Regards
Anthony

westy24 wrote:I sanded it down on a DA sander using 80 grit then 240 grit. Then wire wheeled any rust off ,then etch primed ,primed it then used black aerosol on it , hen asked a mate to lacquer it for me. Hope this helps

Yes it does thanks for that fella

Regards
Anthony

ok ,ive been busy doing abit more then what i expected on the morris ,these last few weeks , the prop ,seat base ,and steering column(you may be interest in what iv done with that one !!) first up is the finished prop.[frame] http://mmoc.org.uk/mbimage.php?src=1447512217_14450 [/frame] What colour ...

Big boy
Do you have any other pics please

bigboy wrote:I would sell it for £200 if anyone's interested.Thanks.

I'm interested but not for £200 as I can make one for much less following plans on here

Regards
Anthony

Yes the welding training will help loads. I taught myself and had a friend show me but that was on box section. H & S side I wouldn't worry to much when you come to do it as you might find your limited on it. Thats mainly for in the workplace tho will give you good tips. You can get cheapish go...

Just seen this Is It worth me doing ? Health & Safety related to fabrication and welding. Instruction and practice for Oxy- Acetylene Welding. Instruction and practice for M.I.G. welding. Forming techniques for thin plate fabrication. Work on individual student projects if required. Regards Anth...

Wire brush, treat any rust with a rust converter I use phosphoric acid then prime, I use mole valley red oxide atleast 2 coats then a couple of coats of chassis black. No mole valley outlets round my way :-? Might make a start next week as working the weekend Are the springs easy to take apart and ...

What do you think wire brush the axle then paint it black ?

Yes - you can do that - if you can get the springs released at the front mounts - and dampers/brake pipe/brake cables. Then wheel it out with springs attached. Probably the easiest way - IF the front mounts release without too much trouble. May need angle grinding on the bolts..... Just ordered som...

Please take pictures - we should start a 'Rogues Gallery' ......Hopefully it was just a temporary deal to move the car around - and not to be run on the road...... Depends how much he liked me doesn't lol Will take pictures as I start maybe not this week as back to work Fri-Mon was thinking of disc...

The New radiator sorted[frame][/frame]

Johnd103 wrote:I defiantly wouldn't give up on it as long as it drives straight looks good it doesn't matter

No idea If It drives straight as Its never been driven for quite a few years all the brakes need sorting as does the whole underneath