Morris Minor Owners Club

iv got cross member off and a gap about 1 1/2 inches but it up against
the steering rack iv got the engine stedy off as well

gearbox was grumballing so iv just rebuilt a sprite box to swop over
i thought that i had to take the floor out to get clearance do i just drop the back of the engine down when the crossmember is undun

i carnt make up my mind wether to take out the tunnel to take the box out or leave the tunnel in and take the engine and box out from underneth my scews in the floor where a bit of a pig to get in and to line up when i put the car to gether 6 mts ago i have a set of ramps and a few jacks all my wate...

i found a very usefull video on youtube theres a man shows you how to strip a su pump change the points and set the dierfram

thanks everyone all sorted wot a difernce it makes iv got new rear springs and engine oil in the dampers and its lovely to drive now no more wolowing and swaying

if its a water pipe can you find a pipe that will fit in side it then cut it where its split poke a pipe in an put 2 juberlee clips on it
if its a vacume pipe for s servo them new washing machine pipes that are
thiner than the old ones are suposed to be the right size

hi sorry for the delay they are all the same diamiter and the same lenth overall but the shoulder is thiner on the blue so if you pushed it in a hole it would go in thever

i have a set of polly bushes for my rear springs 4 pairs red & 2 pairs blue
whitch go where ?


all red in springs ,blue in chassie at the back

or red at the back chassie & spring & blue at the frount

hi it may be to late but on mine i made new pannels i had a large sheet of allieminiom that i found and could not leave on a pile of rubbish it was the back of a sign like in bus sheltors, train stations , out side helfords ect they have a frame round the out side then the glass and the picture and ...

is there one of these lists for gearboxs

iv got my eyes open for a diff at the right price and keep looking for wolesey 1500 back plate and drum but never see any of the brake parts on ebay are the available new any where

hi i just brought a spridget engine and gearbox the engine is in bits and needs rebuilding it is surposed to be ok and just striped for examination im just using the car for every day use (morris 1000 trav 69) i have not picked up the engine yet i did not know whether to rebuild with honed bores pol...

hi about 7 months my traveller would not start no tic noise so cleaned up the points in the pump and found a bubbled up thing (the diode) we thought it was just for the radio so did not worry i have not done any mileage just worked on it every weekend now nearly ready for mot and it starts runs and ...

has anyone ever owned it i brought it from bearsted nr maidstone an it
was old english whight with black interia but it looked like it was orignally
maroon and red inside

mine were full of oil under the top plate i just could not get it to come out by bouncing i have re filled with oil and have been bouncing and left it till tomorow to see if it will seep down
how many bounces does it normaly take to bleed through an can i
get an air lock in there

mine were full of oil under the top plate i just could not get it to come out by bouncing i have re filled with oil and have been bouncing and left it till tomorow to see if it will seep down
how many bounces does it normaly take to bleed through an can i
get an air lock in there

thank you all for your replys
i would be interested to know more about wot is difernt other than
the crank

hi i saw on here some where that you could change the oil in the frount dampers without taking them off so i undone the drain bolt and took a valve out and got about a thimble full of oil out ,so undone the screws on the top removed the plate siefound out wot i could i had allready bounced and lifte...

hi new here iv been looking at a seires engines and wot other people have done and i have not seen any mg metro engines used or 1275 mini i thought you could unbolt the gearbox and bolt a sump on . inline engines are rare and quit exspensive i am now assuming that they are differnt in some way does ...