Morris Minor Owners Club

Yes this is correct for a very late engine breathing arrangement (closed-circuit breathing with a breather inlet SU HS2 carburettor). This arrangement superseded the relatively brief (at least in a Minor) use of a Smiths PCV valve. If you want to know if that has always been the engine breathing sy...

Thanks very much, it is a 10V engine. It does use a bit of oil- will any problems with the breather system cause the engine to use oil? (it doesn't leak)

Please could someone tell me if my oil breather is connected correctly in the photo below(goes to the carb) Thanks

Day 5 all brake pipes in the kit are correct! Fitted them and the rear flexi and the the master cylinder after grinding the sides of it a bit. Bled the system. Then again and again nearly emptied the master cylinder. Pedal still not right. Made up an accelerator cable from my dad's 20kg box of bowde...

Day 1, removed the radiator and connected the loose wires in the engine bay. Put a battery on it and it turned over but no spark. Cleaned points, tested for voltage on coil all ok. Replaced all spark plugs. Put fuel it and it wanted to start but all cables to carb disconnected. Working in the rain s...

ManyMinors wrote: ↑Tue Dec 19, 2023 7:22 am What an interesting car! It should be a well worthwhile project
Good luck with it and keep posting

Cheers

Photos

I thought that maybe someone would be interested in a bit of work I've done to revive a traveller I bought off ebay. Originally a green Lhd traveller delivered to Germany to the British army where it served as a staff car until the previous owner(Terry- in case anyone knows the car) who was statione...