Search found 5 matches

by Fredsmoggy
Sun Sep 10, 2023 5:52 pm
Forum: Mechanical
Topic: Front disc conversion
Replies: 9
Views: 1324

Re: Front disc conversion

Hi adjusted the brake pedal as per book and the moggy drives and stops on the button.

Once again guys thanks for your advice.
by Fredsmoggy
Tue Aug 29, 2023 5:59 pm
Forum: Mechanical
Topic: Front disc conversion
Replies: 9
Views: 1324

Re: Front disc conversion

We could not get enough stroke on the pedal, so disconnected the pedal and used a spanner to push the plunger in the master cylinder and that worked. Bleed the whole system then connected the pedal and have a lovely pedal now.
by Fredsmoggy
Tue Aug 29, 2023 3:09 pm
Forum: Mechanical
Topic: Front disc conversion
Replies: 9
Views: 1324

Re: Front disc conversion

Hi All,

Thank you all for your advice. We have now got the brakes to bleed and lovely firm pedal. After a quick test drive the brakes are fab. Will go out a few more times to bed the discs in.

Once again, thank you all for your advice.
by Fredsmoggy
Mon Aug 14, 2023 1:11 pm
Forum: Mechanical
Topic: Front disc conversion
Replies: 9
Views: 1324

Re: Front disc conversion

Hi, I have not fitted the extra reservoir as yet but I will. This is a new MC from ESM. With the Leeds screws still closed pedal goes to the bottom with no resistance no matter how many time you try. It is the same with the bleed screw open. We also undid the rear banjo and still no fluid leaked fro...
by Fredsmoggy
Mon Aug 14, 2023 10:09 am
Forum: Mechanical
Topic: Front disc conversion
Replies: 9
Views: 1324

Front disc conversion

Hi all, Not long brought a 1968 morris minor. After some help. Just brought the front Ford disc conversion. I have installed all except the extra reservoir. Replaced the brake lines to the front from the master cylinder and replaced the master cylinder with new and done the conversion on. I have tri...