Morris Minor Owners Club

Hi what is the cost of having valve seats hardened

Hi everyone, I'm thinking of putting hardened valves in doris. How easy is it,do you have to change all 8.and do you have to lap them in.

I never disturbed the cables nor the carb I just moved the manifold away from the head still connected to the exhaust. I can't as yet see any electric fault but I just can't understand how she just stopped. I have fuel etc

Yes reset tappets she turns over freely just won't fire up

OK she popped a core plug on the way to a show last Sunday. I found out later it had previously been incorrectly fitted.as she had run dry and overheated. I took the precaution and decided to change head gasket and renew valve seals I reassembled as per manual instructions refilled rad etc.she start...

Hi can anyone help please. Just refitted my cylinder head exhaust manifold etc all new anti freeze in started her up running really sweet approx 5 minutes pressed the throttle pedal she coughed and spluttered stopped and now won't start again.any ideas please

Hi can anyone tell me best size valve compressor for the moggy 1098 head

And greased the area

Have you adjusted the latch yet

Fitting the spin on/off oil filter is one of the best conversions you can do to a 'A' Series engine. Some things are best left standard but the oil filter is not one of them. I have fitted several of these conversions (which was fitted as standard to later 'A' Series engines) and I have never had a...

OK I'll order a new kit see what happens

But there is no spark from ht lead when I turn engine over

Hi there is a definite spark from coil when I touch to earth

Thanks I will give it a try. Once I've sorted the oil filter conundrum.

So there is no spark from coil.ive ordered a new one to try.

Wow just asked for help not a dressing down from a quite rude member,if its not relevant please keep to yourself..I'm new to all this so I'm grateful for any help.

So I have seen all info and I can clearly see I should be fitting the early sprite/ midget spin on as shown by one of the members earlier the moggy spin on clearly doesn't fit the aperture.i get a feeling my engine is not original????.

Finally got pic to send .

I will try again to send pic of filter in position on car but it keeps saying file to big I'm not sure what to do

I'm thinking I need the mg screw on it looks the same as old body