Morris Minor Owners Club

Hi Phil
Loved the look and have ordered a set

Hi are these still available?

Hi
Possibly the same problem that I had with Meggie especially as you are running a similar set up. Have you checked to see if you are running rich? This was mynproblem and a replacement flat and needle valve from SU cured this.
Either way good luck

Cheers John
New float and needle valve ordered from SU.

If it is the float letting too much petrol through would I be correct in assuming that the excess fuel is being pushed out of the overflow and this is what the strong smell of petrol is coming from?

Hi John thank you for tve reply, I will check through the float assembly, the breather is connected on stub close to the inlet.
All the best
Steve

Hi all Please help with this as I am at my wits end. Under load I get reports from passengers of a strong smell of petrol coming into the car. Ar first I thought it may have Been due to there mot being a gasket on the sender unit and petrol weeping at the union of the fuel pipe and tank, these have ...

Hi guys Thank you for the replies I think I may have got there, I heated up a very thin screwdriver and had a good poke and prod which seemed to clear some gunk. So much so that the nipple screwed in properly and grease when in with some coming out of the top. Looking at the trunion I think the rubb...

Hi all I have a issue with the N/S lower trunion.i can not get any grease in, I have replaced the nipple and tried to poke a small screwdriver in with the nipple removed. The screwdriver bottoms out quickly but does ho in much further when I do it to the O/S. I have tried placing a jack under the su...

Love the information that is in the owners manual, so much more interesting and involving than encyclopedia that comes with a new phone accessory ( new car) which tells you how everything runs through a app and how you can not fix anything or even change a wheel. As for repairing the tyres I have a ...

No better car to gentle rambles

Thank you for your replies they are much appreciated after kirsch og Googling as well as lots of elbow grease with different solvent cleaners I am now looking at vinyl fabric dye. I have a old seat cover to try on and will see how that comes out.

I could not agree more with the LED lights like you I have also retro fitted all lamps with LED from Classic Car LED apart from the headlights which a perfect for night driving, the reduction in strain on the wiring and alternator is very noticeable as well as the increased visibility a most worth w...

Morning all
Hope you can help with this I have reupholstered the front seats in Meggie and cleaned the covers which are PVC but they are quite dull and I am struggling to get any sort of shine back into them. I have tried Mothers cleaner and various polishes but to no avail.

Hi Michelle
I did not know there were different diameters but every day is a school day I would be interested in the 22cm hub caps how much would you be asking for them?
Steve

Hi do you still have a set of hub caps?

Hi
Thanks for the reply and offer of help but I have managed to get them done at a Timpsons shoe repair shop by a gent who was very interested and happy to have the challenge for something different. So far it is all holding and looking good

Good afternoon all
Can anyone suggest someone who lives in the Surrey West Sussex area who has a sewing machine that is strong enough to ho through the layers of vinly on a front seat cover as some of the stitching on my cover has snapped and us now pulling apart on the joins.
TIA

Just a quick thank you to the MMOC club and Bryan Gostlin who quickly dispatched a reconditioned fuel pump which came with a guarantee and git Meggie purring again

Morning
They are 2BA