Morris Minor Owners Club

Don't know, but would have expected a deep groove. However I have riveted a 3mm piece of steel onto the underside of the adjusters, which seems to have sorted it for now, and I will try to identify the problem for the future.

Thanks for the answers, I'll check

Not sure that they did, the shoes had very little wear, only changed them because of fluid leaked onto them. I'll check the sizes again.
Thanks.

Hi All
Just fitted new front brake shoes and cylinders, but with the adjuster screwed right up the shoes don't touch the drums. Is this down to worn brake adjusters?

Thanks for that, I will be on the case on Monday

I have lined the old and new together, and there is an obvious difference , the hole for the pin on the new is about 3mm higher.

I have managed to get the pin through, but it only turns a quarter turn, it seems to be fouling the thread. It comes to a stop when all the way on and a stop when it hits the thread when backed off a quarter turn.

Bangor north wales





















bango

I've tried screwing it different amounts to line up with the groove but with on joy

Hi All
I'm new to the forum, and Moggies, hope someone can help.
I've just screwed the bottom trunnion onto the king pin, and the horizontal pin won't pass the king pin, Is this an inaccuracy in the product or am I doing something stupid,