Morris Minor Owners Club

My pleasure. Happy greasing!

The way to fill your Wanner grease gun Farvie is as follows:- 1) Turn the big plastic knob at the end 90 degrees so that the locking arms line up with the slots in the alloy screw-on end cap 2) Pull the knob back as far as it will go against the spring that's holding it in the barrel of the grease g...

mogdobz you have a PM.

Maybe so, but never forget that absinthe makes the heart grow fonder.

Am I missing something here? Responses to a two-year old post? Have we been AI'd again?

[quote=svenedin post_id=707105 time=1744504289 user_id=21995 So my early conclusion is that all those posts from BMCEcosse were basically a bit hyperbolic..........he went on an on about his Wolseley 1500 front brakes. Well I actually not only can compare but I have his brake parts. The very same. T...

Back in the early sixties three of us young bucks used to get out and about looking for the 'action' (quick beer then on to the Locarno or whatever) in a Morris Minor Traveller that our mate Harry owned. Harry invariably had the speedo needle bang up against the stopper pin at the 80mph point on the...

If I had the tools and skill I would make the pipe up the perfect length Get yourself one of these https://www.ebay.co.uk/itm/264859621046?_skw=pipe+bender&itmmeta=01JPK0H0XQ7R5BB2ZZAJ5DM47K&hash=item3daadd16b6:g:wXoAAOSwzNtnnMmd&itmprp=enc%3AAQAKAAAA8FkggFvd1GGDu0w3yXCmi1duAcwsLkkv1fw0...

That'd be about the same time that four spark plugs cost five bob.

Mmm, I wonder if it might have gone stale though...

Unless it's been done already you may decide that having hardened valve seats fitted is a good idea too.

A thin smear of Copaslip?

Mmm...

Dunno about dishwasher tablets but for a pretty heavy-duty cooling system clean out check this video from 10.27 on...

https://www.youtube.com/watch?v=Kpf91W9mbqw

Mispost, now removed. Sorry.

Mmm, I wonder...

Get yourself a can of this https://www.ebay.co.uk/itm/156437807066?_skw=bradex+easy+start&epid=1725101383&itmmeta=01JGKXZV0CW62K2SKTWT83B6S2&hash=item246c6b7fda:g:S4gAAOSwZQBm~FuC&itmprp=enc%3AAQAJAAAA8HoV3kP08IDx%2BKZ9MfhVJKkbwKtmqdjqIqQwAYq%2F50tGrbpnI3Uv%2BiMBfQ4i%2FuD498sZuFz5rc9...

Piston slap? Ready for a re-bore?

You could always experiment with a bit of radiator blanking to get things hotter quicker.

"Allagro", is what you wrote.