Morris Minor Owners Club

Probably the engine would get worn before the seal does! Tanx

Hi could anyone pl advice on the correct gap between the steering rack outer pipe and the upper gearbox rubber seal?

In my case they seem to be touching but no unusual vibration is evident when the engine is running.

Hi SR,

could you please re attach image for trafficator steup ?

tanx

Finally got hold of a pair of good 2nd hand trafficators, but I think I'm missing some kind of bracket to fix them to the body, the car is a 2 door model.

Any ideas anyone?

Back to my problem......actually it was a blown up gasket!!! between cylinders 2 and 3. Could anyone judge what could have gone wrong? The engine is practically new, rebored, new pistons and rings, faced C/Head, new water and oil pumps Quite odd since my late father had travelled 100s of 1000's of m...

thanks bigs

What should a seriesII 1953 model bonnet have as chrome morif?

a. "M" Motif and acute tip bull Motif or
b. Pain chrome curved strip and the shorter bull motif

Can anyone diagnose this fault please: Newly rebored 1098 (+60) engine, new pistons with electronic ignition kit fitted, working fine till today After a 10 mile journey (still working fine) the car developed these Symptoms; working erratically, like firing on 3 cylinders, but none of the spark plugs...

Since the threads at the water outlet elbow are anything but what they should be, I think I nead to tap them through, any idea please what taps should I use?

thanks, in fact the shaft which has the parallel yokes has the right measurement as well, that solves it then...

cam, are the yokes parallell or diplaced through an angle?

hi cam just wanted to know if they are the same from yoke to yoke and if yokes are parallel or skewed, one of the shafts I have has the yoke turned at an angle of about 30 deg or so...

Can u pl measure the prop shaft for me since it's probaly out...

Hi onne, where can i get hold of a chromed cheese grater grille for my series II? BTY are they the same ?

Hi onne, where can i get hold of a chromed cheese grater grille for my series II? BTY are they the same ?

Can anyone pl tell me what is the correct length of the prop shaft? I ended up with two shafts one 42 in and the other 44.5 in (omitting both yokes)

Has anyone ever used these?

http://shop.morrisminorspares.co.uk/pop ... p?pID=2435

Since the above kit is only £ 49, and a Borg and Beck kit is £70, I presume there's quite a leap in quality between them....

Anybody knows where I could get hold of a set of piston rings having chromed topmost rings?

Apparently these are better for sliding up and down the bore....any comments?

I kindly need some info since I'm fitting a Marina rocker set onto a 1098 engine....Is anything different from the original rockers?

I wonder why it should make a difference, I mean once it's pefectly balanced and rotates it should behave the same in both clockwise and anti clockwise motion......