Morris Minor Owners Club

To Richard, All that helped with the disk brakes. I do very much appreciate your pics and advice helping me to get my racer put back together. Some welding and ... are the next steps. Hopefully, the file with pics will be posted. Regards, PHil Z[frame] http://mmoc.org.uk/mbimage.php?src=1432737167_2...

Richard, Thank you for your reply on Sway bar. I'll have to build chassis attachment points as the car currently does not have a sway bar. I did revisit the disk brake info and went over the drawing you sent. And Yes the setup is/will be very close to what you provided. Will follow later this week w...

Richard, YES and Yes; the pics are great and are all that I'll need to build my own brackets. Thank you for taking the pictures. The only issue is to actually build the brackets for wire wheel hubs that have less inner hub offset/back space. Since my H-Mod racer weights about 850 pounds or less the ...

Richard, Thank you again for your reply. I am using the MG Midget wire wheel hub that carries the bearings and the correct rotors; not the bolt on wire wheel adapters. It seems to me that the only to use the "J" flange would be to bolt it on the back side of the axle. There is about 1/8&qu...

Thank you for your reply to my wire wheel application. I received this morning, Monday, a response from Mini Mania. They indicated that their kit will not work with wire wheels; only works with steel wheels. Per your suggestion, I'll use drums at the rear. The only fitting to mount calipers I found ...

Being new to the MM owners Club and living in the USA I realize that I'm at a disadvantage. I am restoring a late 1950s H-Mod car that is based on a MM. I have already replaced the rear and front axles. The rear and fronts have Sprite/MG Midget wire wheel hubs mounted. I would very much like to use ...