Search found 13 matches
- Thu May 09, 2024 8:28 am
- Forum: Mechanical
- Topic: Fitting new drop links - what am I doing wrong?!
- Replies: 11
- Views: 274
Re: Fitting new drop links - what am I doing wrong?!
Thanks Phil, will have another look at the weekend.
- Tue May 07, 2024 2:37 pm
- Forum: Mechanical
- Topic: Fitting new drop links - what am I doing wrong?!
- Replies: 11
- Views: 274
Re: Fitting new drop links - what am I doing wrong?!
It is on both sides, I can get the fixing partly through the damper arm hole enough to get the nut on but cannot get the full length of the taper through. I’ve tried gentle persuasion and that doesn’t work. It all lines up just won't go all the way through as I would expect. I’ll try to clean the ho...
- Tue May 07, 2024 1:33 pm
- Forum: Mechanical
- Topic: Fitting new drop links - what am I doing wrong?!
- Replies: 11
- Views: 274
Fitting new drop links - what am I doing wrong?!
Good afternoon, Currently rebuilding our 1959 4 door and just refitted rear axle, cleaned dampers up, new leaf springs etc and I've tried to fit the new drop links to the damper arm and whatever I do I simply cannot seem to get the tapered drop link into the arm. I've cleaned the hole up after paint...
- Mon May 06, 2024 5:55 pm
- Forum: Wanted
- Topic: Front and rear steel valance
- Replies: 1
- Views: 230
Front and rear steel valance
Good evening,
I’m looking for 2 good condition front and rear valance for our 1959 Morris. My front one might be repairable but on the look out to see what’s available. Anywhere in East Anglia or the Midlands would be good.
Thanks,
James
I’m looking for 2 good condition front and rear valance for our 1959 Morris. My front one might be repairable but on the look out to see what’s available. Anywhere in East Anglia or the Midlands would be good.
Thanks,
James
- Sun Apr 28, 2024 6:18 pm
- Forum: Wanted
- Topic: Damper valve spring
- Replies: 3
- Views: 198
Re: Damper valve spring
Many thanks Phil for your kind offer; PM sent.
- Sat Apr 27, 2024 2:20 pm
- Forum: Wanted
- Topic: Damper valve spring
- Replies: 3
- Views: 198
Damper valve spring
Good afternoon, I have just taken my dampers apart to clean them up and one of them is missing the spring that goes into the body and the valve goes through. Does anyone have a spare one at all? I've attached a picture and circled the spring in question. Apologies in advance Declan Burns for using o...
- Sat Dec 30, 2023 9:53 pm
- Forum: Events
- Topic: UK National rally 2024 location?
- Replies: 4
- Views: 35272
Re: UK National rally 2024 location?
Apologies if I have missed info about it but has it been confirmed as dates says TBC on the website?
- Tue Aug 29, 2023 9:11 pm
- Forum: General Discussion
- Topic: Looking for a rollover jig in East Anglia
- Replies: 0
- Views: 1996
Looking for a rollover jig in East Anglia
Evening everyone,
We are getting ready to start a rebuild on our 1959 Morris minor and before pressing buy on a new rollover jig, wondered if anyone in East Anglia had a jig we could buy off them or hire?
Many thanks,
James
We are getting ready to start a rebuild on our 1959 Morris minor and before pressing buy on a new rollover jig, wondered if anyone in East Anglia had a jig we could buy off them or hire?
Many thanks,
James
- Sat Jun 08, 2019 1:17 pm
- Forum: Other
- Topic: Speedo retaining screws
- Replies: 7
- Views: 2425
Re: Speedo retaining screws
Brilliant, thank you. Where about are you based?firedrake1942 wrote: ↑Sat Jun 08, 2019 12:21 pm I am visiting a scrap car on Monday and I am just down the road from you . If they are there I will recover them and let you know.
- Sat Jun 08, 2019 12:24 pm
- Forum: Other
- Topic: Speedo retaining screws
- Replies: 7
- Views: 2425
Re: Speedo retaining screws
Hi Phil,
Many thanks, will look at those. From memory, they need to be quite short don't they?
Thanks,
James
Many thanks, will look at those. From memory, they need to be quite short don't they?
Thanks,
James
- Sat Jun 08, 2019 12:05 pm
- Forum: Other
- Topic: Speedo retaining screws
- Replies: 7
- Views: 2425
Re: Speedo retaining screws
Thanks, John. Sadly were are in Cambridgeshire so a bit far sadly.
- Sat Jun 08, 2019 11:32 am
- Forum: Other
- Topic: Speedo retaining screws
- Replies: 7
- Views: 2425
Speedo retaining screws
I’ve just had the Speedo repaired on our 1959 4 door Moggy but I’ve misplaced the two retaining screws for it. Does anyone know the part number? Couldn’t easily find it looking at the parts diagrams I’ve found online.
Many thanks,
James
Many thanks,
James
- Sun Aug 05, 2018 2:54 pm
- Forum: Other
- Topic: 1959 - Which screws for glove box hinges and sun visor
- Replies: 1
- Views: 798
1959 - Which screws for glove box hinges and sun visor
Good afternoon, I am missing the screws for the passenger side glove box hinges on our 1959 4 door Morris as well as the two screws for the pivot on the sun visor. Does anyone know the sizes for these screws? I have looked around and think the glove box hinge screws are No. 6 but any advice would be...