Morris Minor Owners Club

Nice one mate thanks for the help ;-)

Hi im wanting to lower the rear but i can only find one and half inch block kits for the minor? Im after lowering it 2"would a block from enough car Fit ie escort? Thanks

Thanks for the reply can the internal arch be modified at all so they don't hit so much?

Hi all i know this has been asked some many times in the past but I'm after a simple answer, ok I've got standard suspension all round atm I've fitted 13 inch mini lights obviously it has a massive wheel arch gap, I'm after lowering the front about 3 inch if pos and the rear about 2inch and i will n...

Hi all I'm after changing my rear lights i have the big bulky late type , is it possible to change to the earlier ones? Also some earlier ones done seem to have indicators how do they get away with that ? Any help would be great
Thanks rob

Ok thanks for the help

Ok wheres the best place to buy these?

Evening all I'm after all new wheel cylinders brake pipes etc are there any decent kits out there that do every thing i need i see ebay do kits not shore to trust them or not ? Thanks Robbie.

Thanks for that works fine now

Can any body tell me what colours wires go to what numbers on the headlight switch? Ive tryed loads diffrent ways but cant get them right? So theres a blue,red/blue,green /red and numbers 1 to 8 on the switch?

Still not got mine

Sorry

Fixed it nice easy one where i replaced thr choke cable i must of knocked one of the wires out of the switch.

I will check the switch over the weekend then hopefuly its that cheers

Im shore hasnt blown at all you can see theres no break in the wire the switch still works as the main beam headlights still work + if a wire was off the side light would that stop the rear lights from working as u i still have break lights working fine confusing lol

Yes i did check that one and change it but still no joy

Where can i find this is it the fuse under the fuse box in engine bay?

Hi ive lost my sidelights and rear lights just stopped working main lights and break light still works tho ive checked fueses seem fine any ideas plz?

Hi I'm thinking of changing my original rocker cover as it looks like someone at some point over tightend the back bolt and its dented inwards, where can i purchase a new one from + mine at the moment doesn't have a breather pipe in it its sealed is it worth getting one with? Thanks rob.

Spray straight on rub it down with some fine paper first i used the same paint fron esm came out ok does take a few days to harden properly