Search found 103 matches
- Mon May 19, 2014 11:22 pm
- Forum: Mechanical
- Topic: filling tecalimet grease gun
- Replies: 7
- Views: 4154
Re: filling tecalimet grease gun
Can this be done without removing the UJ? I can barely get the grease gun in there never mind a spanner.
- Mon May 19, 2014 7:28 am
- Forum: Custom & Modified Register
- Topic: crossflow into moggie
- Replies: 3
- Views: 4298
Re: crossflow into moggie
Possibly an eats shoots and leaves situation here.
I think it should read 'just a change to: electrics, prop-shaft, anything else?'
I think it should read 'just a change to: electrics, prop-shaft, anything else?'
- Sun May 18, 2014 8:18 pm
- Forum: General Discussion
- Topic: Tweed Run
- Replies: 0
- Views: 1388
Tweed Run
I had the pleasure of attending the Tweed Run this saturday to my surprise the pace car was a lovely black Morris Minor
https://fbcdn-sphotos-b-a.akamaihd.net/ ... 5292_n.jpg
I hope the link works it's from Facebook
https://fbcdn-sphotos-b-a.akamaihd.net/ ... 5292_n.jpg
I hope the link works it's from Facebook
- Sun May 18, 2014 7:56 pm
- Forum: Mechanical
- Topic: filling tecalimet grease gun
- Replies: 7
- Views: 4154
Re: filling tecalimet grease gun
Thanks for the drawing, the cork plunger is slightly tapered and can go in easily enough just pressure builds up behind it and I can't force it down and put the lid on. I thought maybe there's old grease clogging it up so cleaned the plunger mechanism with hot water and laundry detergent. Went in fi...
- Sun May 18, 2014 5:37 pm
- Forum: Mechanical
- Topic: filling tecalimet grease gun
- Replies: 7
- Views: 4154
Re: filling tecalimet grease gun
no chain as far as I'm aware:
http://mgaguru.com/mgtech/tools/pics2/g ... GC3020.jpg
Forgot to put the link to a similar one (Yes I'm aware it has instructions in the background have tried to follow them, perhaps I need to put less grease in
http://mgaguru.com/mgtech/tools/pics2/g ... GC3020.jpg
Forgot to put the link to a similar one (Yes I'm aware it has instructions in the background have tried to follow them, perhaps I need to put less grease in
- Sun May 18, 2014 5:25 pm
- Forum: Mechanical
- Topic: filling tecalimet grease gun
- Replies: 7
- Views: 4154
filling tecalimet grease gun
OK I have issues every time I fill my old tecalimet grease gun. I put the grease in about half way and try to push the assembly on top of it. As soon as the cork gets into the barrel it just ceases up I can't get the lid on. Am I doing it all wrong, is there something blocked. I managed to fill it o...
- Tue Mar 25, 2014 11:42 pm
- Forum: Mechanical
- Topic: Time lapse engine rebuild
- Replies: 3
- Views: 1455
Time lapse engine rebuild
http://youtu.be/daVDrGsaDME
Not an A series but perhaps a B-Series, or perhaps it's a triumph still great lot of effort gone into this time lapse, maybe you've seen it before but somebody showed it to me I thought you guys might enjoy it.
Not an A series but perhaps a B-Series, or perhaps it's a triumph still great lot of effort gone into this time lapse, maybe you've seen it before but somebody showed it to me I thought you guys might enjoy it.
- Sun Dec 15, 2013 8:55 pm
- Forum: Mechanical
- Topic: can't go above 60
- Replies: 82
- Views: 14623
Re: can't go above 60
I agree simple is better, though I was thinking of one badge directly on the grille to one side. I had a mk1 mini that had the over riders with corner bars (The car is still in the ex's garage). When putting all the bits back on following paint I left them off, look much better (plus they were letti...
- Thu Dec 12, 2013 9:13 pm
- Forum: General Discussion
- Topic: Summer road trip and wedding Morris Style
- Replies: 2
- Views: 1286
Summer road trip and wedding Morris Style
Hi, thanks to all those who helped me with advice for prepping my morris for a road trip, I went From the midlands down through belgium stopping at antwerp then to Cologne, Dussledorf and Werl, returning via Cologne Aachen and Brussels. all in all I clocked over 1000 miles in a week. The only Issue ...
- Thu Dec 12, 2013 8:51 pm
- Forum: Mechanical
- Topic: can't go above 60
- Replies: 82
- Views: 14623
Re: can't go above 60
Sorry It's been a long time. Thanks for your help and advice, despite burning oil on idle the little Morris made it almost perfectly through belgium and Germany to it's destination, My friends decided on using it for their wedding car, so it got all dolled up. (Credit to Autoglym wax it did 750 mile...
- Wed Jul 24, 2013 12:45 pm
- Forum: Mechanical
- Topic: can't go above 60
- Replies: 82
- Views: 14623
Re: can't go above 60
Am off to Germany, Postponed now until Tuesday, not the cars fault the cars all dressed up with no place to go. Got a full tin of 20/50 in the boot,(I hope I don't go through the whole lot!) I took out the old dizzy I had in the spares box in the boot, I've got a cap and rotor arm and coil (I though...
- Wed Jul 24, 2013 12:47 am
- Forum: Mechanical
- Topic: can't go above 60
- Replies: 82
- Views: 14623
Re: can't go above 60
BMC thanks alot for your help I'm all about ready for a big (1200 mile) road trip.
Just adding the final touches, wash and polish (wax in the morning if the weathers good)
Wurther's original are bought don't see what could possibly go wrong ;-)
Just adding the final touches, wash and polish (wax in the morning if the weathers good)
Wurther's original are bought don't see what could possibly go wrong ;-)
- Wed Jul 24, 2013 12:44 am
- Forum: Mechanical
- Topic: Greasing prop shaft
- Replies: 6
- Views: 2098
Re: Greasing prop shaft
No I didn't get one supplied with my car. But funnily enough my granddad gave me one and I left it in my parents garage thinking the trigger ones were more powerful and convenient. I've been greasing the suspension every few months even if it hasn't been driven much, only just thought to check on th...
- Sun Jul 21, 2013 10:40 pm
- Forum: Electrical
- Topic: Sat Nav glove box
- Replies: 10
- Views: 3184
Re: Sat Nav glove box
damn should have just put a phone holder in there. The USB gadget I bought was two USBs and two outlets so I can plug my phone into one and the GPS in the other, I'd prefer just one thing though maybe when I get a new phone, I have an Iphone 3GS and it's full to the brim and a bit sluggish now proba...
- Sun Jul 21, 2013 10:22 pm
- Forum: Mechanical
- Topic: can't go above 60
- Replies: 82
- Views: 14623
Re: can't go above 60
Oh with the oil pressure gauge wired up
idle cold 55lb/sqft
idle warm 25, (just above 20 with the clutch down, laboured idle)
Fast cruise (65-70mph) looks like about 70lb/sqft)
meduim cruise 40-50mph stays dead on 50lb/sqft
30 mph in 4th something like 40lb/sqft
does this all sound good?
idle cold 55lb/sqft
idle warm 25, (just above 20 with the clutch down, laboured idle)
Fast cruise (65-70mph) looks like about 70lb/sqft)
meduim cruise 40-50mph stays dead on 50lb/sqft
30 mph in 4th something like 40lb/sqft
does this all sound good?
- Sun Jul 21, 2013 10:17 pm
- Forum: Mechanical
- Topic: can't go above 60
- Replies: 82
- Views: 14623
Re: can't go above 60
OK, well I think the fuel pump is behaving itself in this milder weather, I'll get some MPG figures on my big road trip. Plugs are grey white I should richen the mixture. I've done alot on the car today (alot for me) refilled rear dampers (so much better, thanks BMC Ecosse) Sprayed grease on all sus...
- Sun Jul 21, 2013 10:04 pm
- Forum: Electrical
- Topic: Sat Nav glove box
- Replies: 10
- Views: 3184
Re: Sat Nav glove box
Some phones only work like that most of the 'smart phones' actually have a real GPS chip and use the triangulation of phone signal (and wifi) to fill in the gaps if the signal is lost. So yes they should be more robust than a stand alone sat-nav. Can you download the maps for Navfree or will it use ...
- Sun Jul 21, 2013 9:59 pm
- Forum: Mechanical
- Topic: Greasing prop shaft
- Replies: 6
- Views: 2098
Re: Greasing prop shaft
Yeah I've tried rotating it around approaching from the left, from the right, below using a flexi hose and rigid hose, no joy. Manual says 3000 miles actual the same as suspension, but I read somewhere on here while trying find a cunning solution that it's recommended every 1000! I can imagine some ...
- Sun Jul 21, 2013 3:32 pm
- Forum: Mechanical
- Topic: Greasing prop shaft
- Replies: 6
- Views: 2098
Greasing prop shaft
I'm having trouble getting my grease gun to engage on the prop shaft nipples anyone got any suggestions, just doesn't seem to adequate clearance. I also didn't know that you were suppposed to do them every 1000 miles! I thought the most important was the suspension parts to grease. (not that I've do...
- Sun Jul 21, 2013 11:13 am
- Forum: Electrical
- Topic: Removing Ammeter
- Replies: 21
- Views: 5305
Re: Removing Ammeter
I am putting it through the always on fuse. I thought it would be safer incase of a short wire. I remember all my previous cars brake lights working with ignition off. perhaps I remember wrong. Perhaps I should switch it back to normal after 50 years I'm sure someone would have said if they needed f...